Translations:Analysis of reinforced concrete with FEM/58/de: Difference between revisions

From FreeCAD Documentation
(Created page with "- Elastizitätsmodul = 32 GPa (gemäß der Calculix Vorgabe für Beton) - Poissonzahl = 0,17 (gemäß der Calculix Vorgabe für Beton) - uniaxiale Druckfestigkeit = 20...")
 
No edit summary
 
Line 1: Line 1:
- Elastizitätsmodul = 32 GPa (gemäß der Calculix Vorgabe für Beton)
* Elastizitätsmodul = 32 GPa (gemäß der CalculiX-Vorgabe für Beton)
- Poissonzahl = 0,17 (gemäß der Calculix Vorgabe für Beton)
* Poissonzahl = 0,17 (gemäß der CalculiX-Vorgabe für Beton)
- uniaxiale Druckfestigkeit = 20 MPa
* uniaxiale Druckfestigkeit = 20 MPa
- Reibungswinkel = 30 Grad
* Reibungswinkel = 30 Grad

Latest revision as of 07:19, 25 January 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Analysis of reinforced concrete with FEM)
* Young’s modulus = 32 GPa (as per CalculiX default for concrete)
* Poisson ratio = 0.17 (as per CalculiX default for concrete)
* uniaxial compressive strength = 20 MPa
* friction angle = 30 degrees
  • Elastizitätsmodul = 32 GPa (gemäß der CalculiX-Vorgabe für Beton)
  • Poissonzahl = 0,17 (gemäß der CalculiX-Vorgabe für Beton)
  • uniaxiale Druckfestigkeit = 20 MPa
  • Reibungswinkel = 30 Grad