TechDraw HorizontalDimension
TechDraw Dimension_Horizontal |
Menu location |
---|
TechDraw → Dimension_Horizontal |
Workbenches |
TechDraw |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The Dimension_Horizontal tool adds a horizontal dimension to a View. The dimension may be between two vertices, the length of one edge or the horizontal distance between 2 edges. The distance will initially be the projected distance (ie as shown on the drawing), but this may be changed to the actual 3D distance using the Link Dimension tool.
How to use
- Select the points or edge which define your measurement.
- Press the 16 TechDraw Dimension_Horizontal button
- A dimension will be added to the View. The dimension may be dragged to the desired position.
Options
None.
Properties
- DataX: Horizontal position of the dimension text relative to the View.
- DataY: Vertical position of the dimension text relative to the View.
- DataFont: The name of the font to use for the dimension text.
- DataFontsize: Dimension text size in mm.
- DataFormatSpec: Allows additional text to be added to the dimension text. Dimension value will replace %value%.
- DataLineWidth: Dimension line weight.
- DataType: Length,radius,diameter, etc. Not normally manipulated by the end user.
- DataMeasureType: "True" - based on 3D geometry or "Projected" - based on the drawing. Not normally manipulated directly by the end user.
Scripting
Horizonatal dimensions can be added to Pages using Python.
dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "DistanceX"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)
Notes
- None at this time