TechDraw HoleShaftFit

From FreeCAD Documentation
Revision as of 08:42, 14 February 2023 by Edi271 (talk | contribs)
Other languages:

TechDraw HoleShaftFit

Menu location
TechDraw → Add hole/shaft fit
Workbenches
TechDraw
Default shortcut
None
Introduced in version
-
See also
None

Description

The Hole/Shaft Fit tool adds hole/shaft tolerances using ISO 286 to a length dimension or a diameter dimension.

Left the opened panel, right some added tolerances

Usage

  1. Select one length dimension (horizontal, vertical or oblique) or one circle diameter dimension.
  2. Press the Hole/Shaft fit button.
  3. A panel opens in the Combo View.
  4. Select shaft fit / hole fit to show whether your dimension refers to a shaft or a hole.
  5. Select the desired ISO 286 fit field using the combo box. The partner field and the fit type (loose, snug, press) is shown.
  6. Press the OK button.

The label of the selected field and the calculated tolerance values are added to the dimension and shown in the drawing.