Rysunek Techniczny: Wstaw obiekt środowiska Architektura

From FreeCAD Documentation
Revision as of 08:27, 29 May 2023 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

TechDraw ArchView

Menu location
TechDraw → Insert Arch Workbench Object
Workbenches
TechDraw, Arch
Default shortcut
None
Introduced in version
-
See also
Arch Section Plane

Description

The TechDraw ArchView tool inserts a view of an Arch SectionPlane on a TechDraw page.

Usage

  1. Select an Arch section plane in the 3D view or in the tree
  2. If you have multiple drawing pages in your document, you will need to select the desired page in the tree.
  3. Press the Insert Arch Workbench Object button
  4. A view of the objects seen by the section plane will appear on the page.

Limitations

The ArchView is rendered within the Arch Workbench, therefore TechDraw has limited control over its appearance. You may need to make changes within Arch to get the representation you want.

Options

  • The Arch View is rendered by the Arch Workbench.
  • Draft Dimensions, Draft Texts and any other 2D (Sketch or Draft) object considered by the section plane is rendered "as is" (no intersection or hidden lines) on top of the solid geometry
  • The volume of Arch Spaces is not rendered, only the label will be rendered
  • Cut lines, projected lines (if Show Hidden property is set to True) and 2D lines above can be rendered with different line widths. This can be configured in the Arch preferences.
  • The ArchView has two rendering modes:
    • Wireframe, which uses the OpenCasCade algorithms of the TechDraw Workbench, is fast and produces only lines (no face fill possible)
    • Solid, which is based on the Painter's algorithm, and is capable of rendering faces filled with their shape color. However, it is much slower and can fail in many situations.
The image below illustrates the difference between the two rendering modes:
  • Only the base line of Arch Pipes is rendered, not the full volume of the tube:

Properties

See also TechDraw View.

Data

Arch view

  • DANESource (Link): The section plane object to be displayed.
  • DANEAll On (Bool): If hidden objects must be shown or not. If false, only objects that are visible in the 3D view are rendered.
  • DANERender Mode (Enumeration): The render mode to use, Solid or Wireframe.
  • DANEFill Spaces (Bool): If true, Arch Spaces are shown as a colored area.
  • DANEShow Hidden (Bool): If the hidden geometry (the part of the geometry that lies behind the section plane) is shown or not. It will be rendered in dashed line, which can be configured in the Arch preferences.
  • DANEShow Fill (Bool): If cut areas must be filled with a grey color or not.
  • DANELine Width (Float): The width of the main lines. Cut lines and projected/2D line widths ratios can be configured in the Arch preferences.
  • DANEFont Size (Float): The size of all texts that appear in this view.
  • DANECut Line Width (Float): Width of the cut lines in this view.
  • DANEJoin Arch (Bool): If true, walls and structures will be fused by material.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

The ArchView tool can be used in macros and from the Python console by using the following functions:

dv = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewArch','TestArch')
dv.Source = mySectionPlane
rc = page.addView(dv)