Surface: Riempi le curve del contorno

From FreeCAD Documentation
Revision as of 17:06, 29 April 2018 by Renatorivo (talk | contribs) (Created page with "{{GuiCommand/it|Icon=BSplineSurf.svg|Name=Surface Fill boundary curves|Name/it=Riempi le curve del contorno|MenuLocation=Superficie → Riempi le curve del contorno|Workbenche...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Riempi le curve del contorno

Posizione nel menu
Superficie → Riempi le curve del contorno
Ambiente
Superficie
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Description

This tool creates a surface from two, three or four boundary edges. Three different filling styles are available: Curved, Coons, Stretch. The tool creates a smooth transition between the boundary edges.

How to use

  1. Press the Fill boundary curves button.
  2. Select edges in the 3D-view. The edges must connect together in order to give a closed profile.
  3. Set options and press OK.

Options

Properties

DatiFill Type: The applied filling algorithm

  • Curved – the style with the most rounded patches.
  • Coons – a rounded style with less depth than Curved
  • Stretch – the style with the flattest patches

Limitations

It is not possible to apply additional constraints to the surface.


Other languages: