Std ProjectInfo/ro: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 4: Line 4:
|[[Std_Print|Std Print]]
|[[Std_Print|Std Print]]
|[[Std_File_Menu|Std File Menu]]
|[[Std_File_Menu|Std File Menu]]
|IconL=
|IconL=Std_MergeProjects.svg
|IconR=Std_Print.svg
|IconR=Std_Print.svg
|IconC=Freecad.svg
|IconC=Freecad.svg
Line 38: Line 38:
</div>
</div>


# Select the {{MenuCommand|File → Project information...}} option from the menu.
# Select the {{MenuCommand|File → [[Image:Std_ProjectInfo.svg|16px]] Project information...}} option from the menu.
# A dialog box with the following information pops up:
# A dialog box with the following information pops up:
#* '''Name''': The name of the document. {{Emphasis|Not editable}}. Corresponds to the Label property of the document which can be changed in the [[Property_editor|Property editor]].
#* '''Name''': The name of the document. {{Emphasis|Not editable}}. Corresponds to the Label property of the document which can be changed in the [[Property_editor|Property editor]].
Line 60: Line 60:


* The values for the author names, company name and license information can be preset in the [[Preferences Editor#Document|Preferences Editor]].
* The values for the author names, company name and license information can be preset in the [[Preferences Editor#Document|Preferences Editor]].



{{Docnav
{{Docnav
Line 65: Line 66:
|[[Std_Print|Std Print]]
|[[Std_Print|Std Print]]
|[[Std_File_Menu|Std File Menu]]
|[[Std_File_Menu|Std File Menu]]
|IconL=
|IconL=Std_MergeProjects.svg
|IconR=Std_Print.svg
|IconR=Std_Print.svg
|IconC=Freecad.svg
|IconC=Freecad.svg

Revision as of 15:26, 12 December 2020

Informații despre proiect

poziția meniului
File → Informații despre proiect
Ateliere
All
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
nici unul

Descriere

Furnizează informații ausupra proiectului .

The Std ProjectInfo command shows a dialog box with project information belonging to the active document. Some of this information can be edited.

Utilizare

Alegeți FileInformații despre proiect... din meniul de sus/top
Apoi, următoarele informații pot fi introduse într-o fereastră:

  • Name: (Inițial numele fișierului va fi inserat aici)
  • Path: (Inițial calea pentru salvarea fișierului va fi introdus aici)
  • UUID: o sumă de control creată de către FreeCAD va fi introdusă aici
  • Created by: inițial blanc, poate fi introdus aici manual
  • Creation date: Data și timpul creării fișierului va fi completat aici
  • Last modified by: inițial blank, poate fi introdus manual
  • Last modification date: va fi completat în FreeCAD
  • Company: inițial necompletat , poate fi introdus manual
  • License Information: alegeți tipul Licenței din pull-down-menu, Standard este "All rights reserved"
  • License URL: Standard este un link către wikipedia-"All rights reserved"-page. Poate fi supra scris.
  • Comment: inițial necompletat, poate fi introdus manual
  1. Select the File → Project information... option from the menu.
  2. A dialog box with the following information pops up:
    • Name: The name of the document. Not editable. Corresponds to the Label property of the document which can be changed in the Property editor.
    • Path: The full path of the file. Blank if the document has not been saved. Not editable.
    • UUID: FreeCAD automatically enters a checksum value. Not editable.
    • Created by: Enter an author name. Can be preset.
    • Creation date: FreeCAD automatically enters the correct date. Not editable.
    • Last modified by: Enter an author name. Can be preset.
    • Last modification date: FreeCAD automatically enters the correct date. Not editable.
    • Company: Enter a company name. Can be preset.
    • License Information: Select a license from the pulldown menu. Can be preset.
    • License URL: The URL will change with the selected license, but can be overwritten. Can be preset.
    • Comment: Enter any comment that may apply.
  3. Enter the required information and press the OK button.

Options

  • Press Esc or the Cancel button to abort the command.

Preferences

  • The values for the author names, company name and license information can be preset in the Preferences Editor.