Std Alignment/ko: Difference between revisions

From FreeCAD Documentation
(Created page with "==용법==")
(Created page with "# 참조 개체를 선택합니다. 이것은 고정된 개체이며 움직이지 않습니다. # {{KEY|Ctrl}} 키를 누른 채로 배치를 변경하려는 개체를 선택...")
Line 27: Line 27:
==용법==
==용법==


# 참조 개체를 선택합니다. 이것은 고정된 개체이며 움직이지 않습니다.
# Select the reference object. This will be the fixed object and not be changed.
# {{KEY|Ctrl}} 키를 누른 채로 배치를 변경하려는 개체를 선택합니다.
# Hold down the {{KEY|Ctrl}} key while you select the object whose placement you want to change.
# Select the {{MenuCommand|EditAlignment...}} option from the menu.
# 메뉴에서 {{MenuCommand|편집정렬...}} 옵션을 선택합니다.
# 새 창이 [[Main_view_area/ko|주 보기 영역]]에 나타납니다. 이 창은 두 개의 보기로 구성되어 있습니다. 왼쪽의 보기에는 움직일 개체가 보이며 오른쪽 보기에는 고정된 개체가 보입니다.
# A new window will appear in the [[Main_view_area|Main view area]]. This window consists of two views: on the left the movable object is displayed and on the right the fixed object.
# 각 보기에서 한 점씩 클릭하여 첫 번째 점 쌍을 정의합니다. 이 점 쌍은 움직일 개체를 움직이는데 사용됩니다.
# Define the first point pair by clicking a point in each view. This point pair is used to move the movable object.
# 움직일 개체를 회전시키려면 한 두 개 정도 점 쌍을 더 정의합니다.
# Define one or two more point pairs if you also want to rotate the movable object.
# 보기 영역에서 오른쪽 클릭 후 상황에 맞는 메뉴에서 {{MenuCommand|정렬}}을 선택하여 명령을 완료합니다.
# Right-click one of the views and select the {{MenuCommand|Align}} option from the context menu to complete the command.


==Options==
==Options==

Revision as of 05:33, 1 January 2021

표준 정렬

메뉴 위치
편집 → 정렬...
작업대
모두
기본 단축키
없음
도입 버전
-
참조
표준 위치 설정

설명

표준 정렬(Std Alignment) 명령은 하나 이상의 점 쌍을 이용하여 고정된 참조 개체를 기준으로 하나의 개체를 정렬합니다.

두 점 쌍을 정의하고 난 뒤 명령 인터페이스 모습

용법

  1. 참조 개체를 선택합니다. 이것은 고정된 개체이며 움직이지 않습니다.
  2. Ctrl 키를 누른 채로 배치를 변경하려는 개체를 선택합니다.
  3. 메뉴에서 편집 → 정렬... 옵션을 선택합니다.
  4. 새 창이 주 보기 영역에 나타납니다. 이 창은 두 개의 보기로 구성되어 있습니다. 왼쪽의 보기에는 움직일 개체가 보이며 오른쪽 보기에는 고정된 개체가 보입니다.
  5. 각 보기에서 한 점씩 클릭하여 첫 번째 점 쌍을 정의합니다. 이 점 쌍은 움직일 개체를 움직이는데 사용됩니다.
  6. 움직일 개체를 회전시키려면 한 두 개 정도 점 쌍을 더 정의합니다.
  7. 보기 영역에서 오른쪽 클릭 후 상황에 맞는 메뉴에서 정렬을 선택하여 명령을 완료합니다.

Options

The following additional options are available in the context menu:

  • Select the Remove last point option to remove the last point in the view.
  • Select the Cancel option to abort the command.
  • Check the Syncronize views option if any view changes (pan, rotate and zoom) should be applied to both views.