Std Alignment/ko: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Caption|두 점 쌍을 정의하고 난 뒤 명령 인터페이스 모습}}")
(Created page with "==용법==")
Line 25: Line 25:
{{Caption|두 점 쌍을 정의하고 난 뒤 명령 인터페이스 모습}}
{{Caption|두 점 쌍을 정의하고 난 뒤 명령 인터페이스 모습}}


==Usage==
==용법==


# Select the reference object. This will be the fixed object and not be changed.
# Select the reference object. This will be the fixed object and not be changed.

Revision as of 05:22, 1 January 2021

표준 정렬

메뉴 위치
편집 → 정렬...
작업대
모두
기본 단축키
없음
도입 버전
-
참조
표준 위치 설정

설명

표준 정렬(Std Alignment) 명령은 하나 이상의 점 쌍을 이용하여 고정된 참조 개체를 기준으로 하나의 개체를 정렬합니다.

두 점 쌍을 정의하고 난 뒤 명령 인터페이스 모습

용법

  1. Select the reference object. This will be the fixed object and not be changed.
  2. Hold down the Ctrl key while you select the object whose placement you want to change.
  3. Select the Edit → Alignment... option from the menu.
  4. A new window will appear in the Main view area. This window consists of two views: on the left the movable object is displayed and on the right the fixed object.
  5. Define the first point pair by clicking a point in each view. This point pair is used to move the movable object.
  6. Define one or two more point pairs if you also want to rotate the movable object.
  7. Right-click one of the views and select the Align option from the context menu to complete the command.

Options

The following additional options are available in the context menu:

  • Select the Remove last point option to remove the last point in the view.
  • Select the Cancel option to abort the command.
  • Check the Syncronize views option if any view changes (pan, rotate and zoom) should be applied to both views.