Std: Mangerul de Addon
Addon manager |
poziția meniului |
---|
Tools → Addon manager |
Ateliere |
None |
scurtătură |
nici unul |
Prezentat în versiune |
0.17 |
A se vedea, de asemenea, |
Macros, External workbenches |
Description
Addon Manager ”-gestionarul de extensii-” este un instrument pentru a instala și administra external workbenches atelierele de lucru și macros oferite de comunitatea FreeCAD. Dacă pachetul git-python este instalat pe computer, Managerul de aplicații addon îl va utiliza pentru a actualiza atelierele de lucru instalate, făcând descărcările mai rapide.
Addons that are marked as Python 2 Only will not work in FreeCAD version 0.19 or higher.
Due to changes to the GitHub platform in the year 2020 the Addon manager no longer works if you use FreeCAD version 0.17 or earlier. You need to upgrade to version 0.18.5 or a recent 0.19 version. Alternatively you can install addons manually, see Notes below.
Interface of the Addon Manager
Cum se folosește
- Deschideți meniul de instrumente Tools → Addon manager.
- Pentru a instala un atelier sau o macro: derulați în jos lista și selectați atelierul de completare. O scurtă descriere a atelierului suplimentar va fi afișată sub listă, precum și link-ul către pagina complementară. Apoi apăsați butonul Install/update pentru a instala noul instrument. Pentru macro-uri, faceți clic pe tab-ul Macros și repetați pașii.
- Pentru a elimina un atelier sau macro parcurgeți lista, selectați atelierul sau add-on și apăsați butonul Install/update .
- Pentru a actualiza un atelier sau macro parcurgeți, selectați plugin-ul și apăsați butonul Install/update.
- Pentru a verifica actualizările apăsați Refresh Actulaizările disponibile vor fi raportatea în partea de jos a listei. Apăsați Refresh pentru a instala odată toate actualizările
Note: Notă: pictograma poate să arate diferit în funcție de sistemul dvs. de operare. Actualizările disponibile vor fi raportate în listă.
- Pentru a rula o macrocomandă: instalați mai întâi macroul dorit, apoi selectați din nou din listă, apoi apăsați butonul Execute.
- Apăsați butonul Close pentru a ieși din manager.
Options
The Addon manager dialog box has two tabs on the left, one listing the available workbenches and the other listing the available macros. The information panel on the right will display the homepage of the selected addon.
Uninstall
- Select an installed addon on the Workbenches tab or the Macros tab.
- Press the Uninstall selected button.
Install/update
- Select an addon on the Workbenches tab or the Macros tab.
- Press the Install/update selected button.
- If you want to add a macro to a custom toolbar then don't forget to manually download the icon image file, if available, by clicking on the link on the homepage in the information panel. See Interface Customization.
- To change the position of an addon workbench in the Workbench selector list see Interface Customization.
Configuration
- Press the Configure... button.
- The Addon manager options dialog box opens.
- Optionally check the Automatically check for updates at start (requires GitPython) checkbox.
- Optionally add repositories to the Custom repositories list. Addons from these repositories will be added on the Workbenches tab or the Macros tab.
- Optionally choose proxy settings.
- Press the OK button or the Cancel button to close the dialog box.
Notes
- The use of addons is not restricted to the FreeCAD version they were installed from. You will also be able to use them in any other FreeCAD version, supported by the addon, that you may have on your system.
- The addons available in the Addon manager are not part of the official FreeCAD program and are not supported by the core FreeCAD development team. You should read the provided information carefully to make sure you know what you are installing.
- Bug reports and feature requests should be made directly to the creator of the addon by visiting the indicated website. Many addon developers are regular users of the FreeCAD forum, and can also be contacted there.
- If the GitPython package is installed on your computer the Addon manager will make use of it, making downloads faster.
- You can also install addons manually. See How to install additional workbenches and How to install macros.
Information for developers
Dacă ați dezvoltat un atelier de lucru sau o macrocomandă și doriți să îl vedeți inclus în Addon Manager, citiți cum să faceți acest lucru în paginile de depozitului (FreeCAD-addons și FreeCAD-macros). Dacă adăugați macrocomanda în Macros recipes, nu mai este nimic altceva de făcut, acesta va fi selectat automat de către Addon Manager.
Python workbenches
Pentru atelierele de lucru python, nu aveți nevoie de aprobarea specifică pentru a adăuga atelierul dvs. de lucru la Addon Manager și, în afara codului sursă al FreeCAD, puteți alege licența dorită. Dacă cereți ca atelierul dvs. de lucru să fie adăugat pe listă (nu vom adăuga un nou atelier de lucru fără o solicitare din partea autorilor săi), fie prin solicitarea acestuia pe forum, fie prin deschiderea unei probleme în / FreeCAD / FreeCAD-addons / FreeCAD-addons, codul dvs. va rămâne pe propriul depozit git, îl vom adăuga ca submodul la FreeCAD- addons repository. Desigur, înainte de a adăuga atelierul dvs. de lucru, vom examina acest lucru și vă vom asigura că nu există nimic potențial problematic cu acesta.
C++ workbenches
Dacă dezvoltați un aelier de lucru în C ++, acesta nu poate fi rulat direct de către utilizatori și trebuie compilat mai întâi. Apoi, aveți două opțiuni, fie că furnizați dvs. înșiși versiuni precompilate ale atelierului dvs. de lucru, fie pentru diferite sisteme de operare, fie că doriți să introduceți codul sursă în codul sursă al FreeCAD. Pentru aceasta, ar trebui să utilizați licența LGPL (sau pe deplin compatibilă ca MIT sau BSD) și trebuie să prezentați noile instrumente comunității pe forumul FreeCAD pentru examinare. Odată ce codul dvs. a fost testat și aprobat, ar trebui să bifurcați depozitului FreeCAD, dacă nu ați făcut-o deja, pentru a crea o nouă ramură, în care să puneți codul și să solicitați, astfel încât ramura dvs. să fuzioneze în depozitul principal.
- File: New, Open, Close, Close All, Save, Save As, Save a Copy, Save All, Revert, Import, Export,Merge project, Project information, Print, Print preview, Export PDF, Recent files, Exit
- Edit: Undo, Redo, Cut, Copy, Paste, Duplicate selection, Refresh, Box selection, Box element selection, Select All, Delete, Send to Python Console, Placement, Transform, Alignment, Toggle Edit mode, Edit mode, Preferences
- View:
- Miscellaneous: Create new view, Orthographic view, Perspective view, Fullscreen, Bounding box, Toggle axis cross, Clipping plane, Texture mapping, Toggle navigation/Edit mode, Appearance, Random color, Workbench, Status bar
- Standard views: Fit all, Fit selection, Isometric, Dimetric, Trimetric, Home, Front, Top, Right, Rear, Bottom, Left, Rotate Left, Rotate Right
- Freeze display: Save views, Load views, Freeze view, Clear views
- Draw style: As is, Points, Wireframe, Hidden line, No shading, Shaded, Flat lines
- Stereo: Stereo red/cyan, Stereo quad buffer, Stereo Interleaved Rows, Stereo Interleaved Columns, Stereo Off, Issue camera position
- Zoom: Zoom In, Zoom Out, Box zoom
- Document window: Docked, Undocked, Fullscreen
- Visibility: Toggle visibility, Show selection, Hide selection, Select visible objects, Toggle all objects, Show all objects, Hide all objects, Toggle selectability, Toggle measurement, Clear measurement
- Toolbars: File, Edit, Clipboard, Workbench, Macro, View, Structure, Help
- Panels: Tree view, Property view, Selection view, Tasks, Python console, DAG view, Model, Report view
- Link navigation: Go to linked object, Go to the deepest linked object, Select all links
- Tree view actions: Sync view, Sync selection, Sync placement, Pre-selection, Record selection, Single document, Multi document, Collapse/Expand, Initiate dragging, Go to selection, Selection Back, Selection Forward
- Tools: Edit parameters, Save image, Load image, Scene inspector, Dependency graph, Project utility, Measure distance, Add text document, View turntable, Units calculator, Customize, Addon manager
- Macro: Macro recording, Macros, Recent macros, Execute macro, Attach to remote debugger, Debug macro, Stop debugging, Step over, Step into, Toggle breakpoint
- Help: Help, FreeCAD Website, Donate, Users documentation, Python scripting documentation, Automatic Python modules documentation, FreeCAD Forum, FreeCAD FAQ, Report a bug, About FreeCAD, What's This
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub