草图工作台中的草图验证工具

From FreeCAD Documentation
Revision as of 03:13, 11 July 2019 by Wconly (talk | contribs)

Sketcher ValidateSketch

Menu location
Sketch / Part Design → Validate sketch…
Workbenches
Sketcher, PartDesign
Default shortcut
None
Introduced in version
-
See also
None

描述

草图验证(Validate sketch)工具可用于修复不可编辑的草图、存在无效约束的草图,以及添加有缺失的重合约束的根据DXF等文件中导入的几何图形所创建的草图。此工具也可有效的定位本地草图中缺失的重合约束,这个问题将导致在您试图应用一个PartDesign特征时生成一个"can't validate broken face"错误。


File:Sketcher validation tasks.png

如何使用

  1. Select the sketch to validate, either from the Model tree, or by clicking on one of its edges in the 3D view. Note: the sketch must not be in editing mode. If you are in sketch edit mode, you need to exit the sketch.
  2. Open the validate sketch utility from the Sketch or Part Design menu.
  3. See Options below for operation.
  4. Press the Close button when done.

选项

Missing coincidences

Finds out missing coincidences for overlapping vertices, and adds them. Press the Find button; a pop up dialog will appear to report how many missing coincidences were found; they will be shown in the 3D view as yellow crosses. Press OK to close the dialog, then press the Fix button to add the missing coincidences.

If necessary, define a larger tolerance value in the drop-down field.

Leave the "Ignore construction geometry" checkbox checked to disregard construction geometry in the analysis.

无效约束

逆向外部几何图形

Constraint orientation locking