Sketcher ValidateSketch/pl: Difference between revisions
(Updating to match new version of source page) |
(Updating to match new version of source page) |
||
Line 1: | Line 1: | ||
<languages/> |
<languages/> |
||
{{Docnav |
{{Docnav |
||
|[[Sketcher_ReorientSketch|Reorient sketch]] |
|[[Sketcher_ReorientSketch|Reorient sketch]] |
||
Line 20: | Line 21: | ||
==Description== |
==Description== |
||
The '''Validate sketch''' utility can be used to analyze and repair a sketch that is no longer editable |
The '''Validate sketch''' utility can be used to analyze and repair a sketch that is no longer editable or has invalid constraints, or to add missing [[Sketcher_ConstrainCoincident|coincident constraints]] to a sketch created from imported geometry such as DXF files. It can also be useful to locate a missing coincidence in a native sketch that generates a "can't validate broken face" error when trying to apply a PartDesign feature. |
||
[[File:Sketch Validate Tasks 019.png|left]] |
|||
{{clear}} |
|||
[[File:Sketcher_ValidateSketch_taskpanel.png]] |
|||
{{Caption|The Sketcher validation task panel}} |
|||
==Usage== |
==Usage== |
||
# This tool cannot be used on a sketch that is in edit mode. If required exit edit mode by doing one of the following: |
|||
⚫ | |||
⚫ | |||
#: '''Note:''' the sketch must '''not''' be in editing mode. If you are in sketch edit mode, you need to use either: |
|||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
# |
# To open the validate sketch utility do one of the following: |
||
#* |
#* Select the {{MenuCommand|Sketch → Validate sketch...}} option from the menu. |
||
#* |
#* Press the {{Button|[[File:Sketcher_ValidateSketch.svg|16px]] [[Sketcher_ValidateSketch|Validate sketch]]}} button (not available in the [[PartDesign_Workbench|PartDesign Workbench]]). |
||
# See [[#Options|Options]] below for |
# See [[#Options|Options]] below for the available operations. |
||
# Press the {{Button|Close}} button when done. |
# Press the {{Button|Close}} button when done. |
||
Line 50: | Line 49: | ||
Press {{Button|Highlight open vertexes}} to highlight vertexes that are outside this tolerance. |
Press {{Button|Highlight open vertexes}} to highlight vertexes that are outside this tolerance. |
||
This tolerance is also used by the {{Button|Find}}/{{Button|Fix}} process |
This tolerance is also used by the {{Button|Find}}/{{Button|Fix}} process. |
||
Leave the "Ignore construction geometry" checkbox checked to disregard construction geometry in the analysis. |
Leave the "Ignore construction geometry" checkbox checked to disregard construction geometry in the analysis. |
||
===Invalid constraints=== |
===Invalid constraints=== |
||
Checks for malformed constraints. |
Checks for malformed constraints. |
||
Line 64: | Line 64: | ||
===Degenerated geometry=== |
===Degenerated geometry=== |
||
Degenerated geometry can result from solver actions in a sketch. |
Degenerated geometry can result from solver actions in a sketch. |
||
Line 71: | Line 72: | ||
===Reversed external geometry=== |
===Reversed external geometry=== |
||
Reversed external geometry can happen because the handling of reversed geometry was changed around revision 0.15. |
Reversed external geometry can happen because the handling of reversed geometry was changed around revision 0.15. |
||
Line 76: | Line 78: | ||
===Constraint orientation locking=== |
===Constraint orientation locking=== |
||
Tangent and perpendicular constraints are implemented (via-point). |
Tangent and perpendicular constraints are implemented (via-point). |
||
Internally they work by constraining the angle between tangent vectors. With tangent constraint for example, the angle can be 0 or 180 degrees (co-directed or opposed vectors). The actual angle is remembered in the constraint data ("constraint orientation is locked"), it guards against flipping. But the angle can be erased ("constraint orientation unlock") or updated; these tools do exactly that. |
Internally they work by constraining the angle between tangent vectors. With tangent constraint for example, the angle can be 0 or 180 degrees (co-directed or opposed vectors). The actual angle is remembered in the constraint data ("constraint orientation is locked"), it guards against flipping. But the angle can be erased ("constraint orientation unlock") or updated; these tools do exactly that. |
||
The locking mechanism typically works well and this tool should not be needed. |
The locking mechanism typically works well and this tool should not be needed. '''It should only used after making a backup of the open document.''' |
||
{{Docnav |
{{Docnav |
Revision as of 12:16, 21 February 2021
Sketcher: Sprawdź poprawność szkicu |
Lokalizacja w menu |
---|
Sketch → Sprawdź poprawność szkicu ... |
Środowisko pracy |
Sketcher, PartDesign |
Domyślny skrót |
brak |
Wprowadzono w wersji |
- |
Zobacz także |
brak |
Description
The Validate sketch utility can be used to analyze and repair a sketch that is no longer editable or has invalid constraints, or to add missing coincident constraints to a sketch created from imported geometry such as DXF files. It can also be useful to locate a missing coincidence in a native sketch that generates a "can't validate broken face" error when trying to apply a PartDesign feature.
The Sketcher validation task panel
Usage
- This tool cannot be used on a sketch that is in edit mode. If required exit edit mode by doing one of the following:
- Press the Leave sketch button.
- Press the Close button at the top of the Task panel.
- Use the keyboard shortcut: Esc (if enabled in the Sketcher Preferences).
- Select the sketch to be validated from the Tree view or by clicking on one of its edges in the 3D view.
- To open the validate sketch utility do one of the following:
- Select the Sketch → Validate sketch... option from the menu.
- Press the Validate sketch button (not available in the PartDesign Workbench).
- See Options below for the available operations.
- Press the Close button when done.
Options
Missing coincidences
Finds out missing coincidences for overlapping vertices, and adds them. Press the Find button; a pop up dialog will appear to report how many missing coincidences were found; they will be shown in the 3D view as yellow crosses. Press OK to close the dialog, then press the Fix button to add the missing coincidences.
If necessary, define a larger tolerance value in the drop-down field.
Press Highlight open vertexes to highlight vertexes that are outside this tolerance.
This tolerance is also used by the Find/Fix process.
Leave the "Ignore construction geometry" checkbox checked to disregard construction geometry in the analysis.
Invalid constraints
Checks for malformed constraints.
For example, if there is a Circle-Line-Tangent constraint, but it references two lines, it is considered invalid.
(This sometimes happens due to the Topological naming problem, i.e. the external geometry changes type).
It also does other checks, such as for empty links.
Degenerated geometry
Degenerated geometry can result from solver actions in a sketch.
For instance, if a line is forced to shorten to become almost a point.
Other examples: a zero length line or zero radius circle/arc.
Reversed external geometry
Reversed external geometry can happen because the handling of reversed geometry was changed around revision 0.15.
This process might be helpful if sketches with external-geometry fail to solve because of these changes.
Constraint orientation locking
Tangent and perpendicular constraints are implemented (via-point).
Internally they work by constraining the angle between tangent vectors. With tangent constraint for example, the angle can be 0 or 180 degrees (co-directed or opposed vectors). The actual angle is remembered in the constraint data ("constraint orientation is locked"), it guards against flipping. But the angle can be erased ("constraint orientation unlock") or updated; these tools do exactly that.
The locking mechanism typically works well and this tool should not be needed. It should only used after making a backup of the open document.
- Przybory: Nowy szkic, Edycja szkicu, Mapuj szkic na powierzchnię, Zmień orientację szkicu, Sprawdź poprawność szkicu, Połącz szkice, Odbicie lustrzane szkicu, Zamknij szkic, Widok szkicu, Widok przekroju, Włącz / wyłącz siatkę, Włącz / wyłącz przyciąganie, Kolejność renderowania, Przerwij operację
- Geometrie szkicownika: Punkt, Linia, Komponent utwórz łuk, Łuk, Utwórz łuk przez 3 punkty, Komponent utwórz okrąg, Okrąg, Utwórz okrąg przez 3 punkty, Komponent utwórz stożek, Utwórz elipsę względem środka, Utwórz elipsę przez 3 punkty, Utwórz łuk elipsy, Utwórz łuk hyperboli, Utwórz łuk paraboli, Komponent utwórz krzywą złożoną, Utwórz krzywą złożoną, Utwórz okresową utwórz krzywą złożoną, Polylinia (linia wielopunktowa), Prostokąt, Komponent utwórz wielokąt foremny, Trójkąt, Kwadrat, Pięciokąt, Sześciokąt, Siedmiokąt, Ośmiokąt, Utwórz wielokąt foremny, Rowek, Zaokrąglenie, Zaokrąglenie z zachowaniem wiązań, Przytnij, Rozszerz, Geometria zewnętrzna, Kalka techniczna, Tryb konstrukcyjny
- Wiązania szkicownika
- Wiązania geometryczne Wiązanie zbieżności punktów, Wiązanie punktu na obiekcie, Wiązanie pionowe, Wiązanie poziome, Wiązanie równoległości, Wiązanie prostopadłości, Wiązanie styczności, Wiązanie równości, Wiązanie symetrii, Wiązanie zablokowania
- Wiązania wymiarów Wiązanie blokady odległości, Zwiąż odległość poziomą, Zwiąż odległość pionową, Wiązanie odległości, Wiązanie promienia, Wiązanie średnicy, Zwiąż automatycznie promień / średnicę, Wiązanie kąta, Wiązanie prawo Snella
- Narzędzia wiązań: Przełącz kontrolę wiązania, Przełącz aktywność wiązania
- Narzędzia szkicownika Wybierz elementy bez wiązań, Wybierz powiązane więzy, Wybierz powiązaną geometrię, Wybierz zbędne wiązania, Wybierz wiązania konfliktowe, Pokaż / ukryj geometrię wewnętrzną, Wybierz odniesienie położenia, Wybierz oś poziomą, Wybierz oś pionową, Odbicie lustrzane, Klonuj, Kopiuj, Przesuń, Szyk prostokątny, Usuń wyrównanie osi, Usuń wszystkie geometrie, Usuń wszystkie wiązania
- Narzędzia B-spline dla szkicownika. Pokaż / ukryj stopień krzywej złożonej, Pokaż/ukryj ramkę kontrolną krzywej złożonej, Pokaż / ukryj grzebień krzywizny krzywej złożonej, Pokaż / ukryj wyświetlanie węzłów krzywej złożonej, Pokaż / ukryj wagę punktu kontrolnego krzywej złożonej, Konwertuj geometrię na krzywą złożoną, Zwiększ stopień krzywej złożonej, Zmniejsz stopień krzywej złożonej, Zwiększ krotność węzłów krzywej złożonej, Zmniejsz krotność węzła krzywej złożonej, Wstaw węzeł, Połącz krzywe
- Przestrzeń wirtualna szkicownika Przełącz przestrzeń wirtualną
- Dodatkowe: Okienko dialogowe Szkicownika, Preferencje, Skrypty Szkicownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework