Sketcher LinearAnordnen
Sketcher Translate |
Menu location |
---|
Sketch → Sketcher tools → Array transform |
Workbenches |
Sketcher |
Default shortcut |
W |
Introduced in version |
1.0 |
See also |
None |
Beschreibung
The Sketcher Translate tool moves or optionally creates copies of selected elements. Copies are evenly distributes along one or two directions.
Anwendung
See also: Drawing aids.
Pos-OVP = Positional On-View-Parameters.
Dim-OVP = Dimensional On-View-Parameters.
Move geometry
- Select one or more edges and/or Point objects. Constraints restricted to the selected elements are also processed. Any other constraints associated with the elements will be deleted.
- There are several ways to invoke the tool:
- Press the Array transform button.
- Select the Sketch → Sketcher tools → Array transform option from the menu.
- Right-click in the 3D view and select the Array transform option from the context menu.
- Use the keyboard shortcut: W.
- The cursor changes to a cross with the tool icon.
- The Translate parameters section is added at the top of the Sketcher Dialog.
- Pick the start point of the translation vector. Or with Pos-OVP: enter its X and/or Y coordinate.
- Pick the end point of the translation vector. Or with Dim-OVP: enter the length and/or angle of the vector. The angle is relative to the X axis of the sketch.
- The elements are moved. No Pos-OVP or Dim-OVP based constraints are added.
Copy geometry
- Select one or more edges and/or Point objects. Constraints restricted to the selected elements are also processed.
- Invoke the tool as explained above.
- The cursor changes to a cross with the tool icon.
- The Translate parameters section is added at the top of the Sketcher Dialog.
- Optionally change the number of Copies along the first vector:
- Enter a number.
- Press the U key to increase the number.
- Press the J key to decrease the number.
- Optionally change the number of Rows along the second vector:
- Enter a number.
- Press the R key to increase the number.
- Press the F key to decrease the number.
- Optionally check the Clone constraints checkbox to create Equal constraints instead of copies of distance, radius and diameter constraints.
- Pick the start point of the first vector. Or with Pos-OVP: enter its X and/or Y coordinate. This vector defines the offset between copies.
- Pick the end point of the first vector. Or with Dim-OVP: enter the length and/or angle of the vector. The angle is relative to the X axis of the sketch.
- If there are two or more rows: Pick the end point of the second vector. Or with Dim-OVP: enter the length and/or angle of the vector. The angle is relative to the X axis of the sketch. This vector defines the offset between rows.
- The elements are copied. No Pos-OVP or Dim-OVP based constraints are added.
Sketcher
(FIXME)
- Die Werkzeuge: Skizze erstellen, Skizze bearbeiten, Skizze verlassen, Skizze anzeigen, View section, Skizze einer Fläche zuordnen..., Reorient sketch, Skizze überprüfen, Skizzen zusammenführen, Skizze spiegeln
- Skizzen-Geometrien: Punkt, Linie, Bögen erstellen, Bogen, Kreisbogen durch drei Punkte, Kreise erstellen, Kreis, Kreis durch drei Punkte, Kegelförmige Körper erstellen, Ellipse mit Mittelpunkt, Ellipse durch drei Punkte, Ellipsenbogen, Hyperbel erstellen, Parabel erstellen, B-splines erstellen, B-spline, Create periodic B-spline, Linienzug (Mehrpunktlinie), Rechteck, Reguläres Polygon erstellen, Dreieck, Quadrat, Fünfeck, Sechseck, Siebeneck, Achteck, Create Regular Polygon, Nut, Abrundung erstellen, Kante zuschneiden, Verlängern, Externe Geometrie, CarbonCopy, Konstruktionsmodus
- Skizzenbeschränkungen
- Geometrische Beschränkungen Koinzidenz erzwingen, Punkt auf Objekt festlegen, Vertikal, Horizontal, Parallel, Orthogonal, Tangente, Gleichheit, Symmetrisch, Constrain Block
- Dimensional constraints Sperren, Horizontaler Abstand, Vertikaler Abstand, Distanz festlegen, Radius festlegen, Winkel festlegen, Snell's Law, Umschalten auf steuernde Bemaßung,
- Sketcher tools Select solver DOFs, Close Shape, Connect Edges, Select Constraints, Select Origin, Select Vertical Axis, Select Horizontal Axis, Select Redundant Constraints, Select Conflicting Constraints, Select Elements Associated with constraints, Show/Hide internal geometry, Symmetry, Clone, Copy, Move, Rectangular Array, Delete All Geometry, Delete All Constraints
- Sketcher B-spline tools Show/Hide B-spline degree, Show/Hide B-spline control polygon, Show/Hide B-spline curvature comb, Show/Hide B-spline knot multiplicity, Convert Geometry to B-spline, Increase degree, Increase knot multiplicity, Decrease knot multiplicity
- Sketcher virtual space Switch Virtual Space
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework