Szkicownik: Przełącz kontrolę wiązania

From FreeCAD Documentation
Revision as of 16:51, 9 April 2023 by Kaktus (talk | contribs) (Created page with "==Użycie==")

Sketcher ToggleDrivingConstraint

Menu location
Sketch → Sketcher constraints → Toggle driving/reference constraint
Workbenches
Sketcher
Default shortcut
K X
Introduced in version
0.16
See also
Sketcher Toggle Construction

Opis

Narzędzie Przełącz wiązanie kontrolujące zmienia więzy wymiarowe (blokady odległości, odległości pionowej / poziomej, Długości, Promienia i Kąta) w tryb referencyjny i z powrotem. Ikony na pasku narzędzi zmieniają kolor na niebieski i zamiast ograniczeń wymiarowych tworzone są wymiary odniesienia. Wymiary referencyjne nie wiążą szkicu. Tworzenie wymiarów referencyjnych w szkicu może być użyteczne jako sposób sprawdzania wymiarów. Po nadaniu im nazwy mogą być również używane do tworzenia więzów w innym szkicu poprzez wyrażenia.


The Sketcher Constraint toolbar with the dimensional constraints in reference dimension mode (blue).


A horizontal distance constraint (50 mm), a vertical constraint (30 mm) and an angle constraint (75°) were set to define the profile; a reference dimension was added on the slanted line segment to know its length (31.0583 mm).

Użycie

  1. Press the Toggle driving constraint button. The dimensional constraints icons in the Sketcher Constraints toolbar turn from red to blue.
  2. The usual method of creating dimensional constraints works the same, but a blue reference dimension is added instead.
  3. To turn the Sketcher Constraints toolbar back to constraint mode (red), press the Toggle Constraint button again.
  4. To turn a dimensional constraint into a reference dimension, or the reverse, select it and press the Toggle Constraint button.