Sketcher: Reorientare schiță
Sketcher Reorient |
Menu location |
---|
Part design → Reorient sketch |
Workbenches |
Sketcher, PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
Map sketch, New Sketch |
Descriere
Vă permite să detașați o schiță de pe o fațetă și să o atașați la unul dintre planurile importante (cu sau fără o deplasare gen offset).
Utilizare
- Select the sketch to be re-oriented in the tree-view
- Choose Sketch → Reorient sketch from the top menu
- A menu will pop up and ask you if you want to detach the sketch from its face
- Selecting Yes will give you the same menu as in Sketch → New Sketch
- You can attach the sketch to one of the main planes
- You also have the possibility to add a positive or negative offset
Orientarea schiței
* Planul XY * Planul XZ * Planul YZ
- Inversare Direcției vizualizării din plan, de exemplu de sus sau de jos.
- Offset: a da o deplasarea planului în raport cu coordonatele originii X=0 Y=0 et Z=0.
Note
- Când selectați tasta Cancel în al doilea meniu schița este pur și simplu detașată de pe fațeta ei.
- Atâta timp cât nici o schiță nu este selectată, comanda este în gri deschis.
- When selecting Cancel in the second menu the sketch is simply detached from its face.
- As long as no sketch is selected, the command is greyed out.