Sketcher NewSketch/ro: Difference between revisions
(Created page with "====Utilizare==== Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the * XY-Plane * XZ-Plane * YZ-Plane You can...") |
(Created page with "====Notă==== The sketch can be re-mapped to another already existing face using the Map Sketch - Command") |
||
Line 14: | Line 14: | ||
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face. |
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face. |
||
==== |
====Notă==== |
||
The sketch can be re-mapped to another already existing face using the [[Sketcher MapSketch|Map Sketch - Command]] |
The sketch can be re-mapped to another already existing face using the [[Sketcher MapSketch|Map Sketch - Command]] |
||
Revision as of 15:06, 17 October 2018
Sketcher NewSketch |
Menu location |
---|
Sketch → Create sketch |
Workbenches |
Sketcher, PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
Sketcher MapSketch, Sketcher Reorient |
Descriere
This will create a new sketch.
Utilizare
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
- XY-Plane
- XZ-Plane
- YZ-Plane
You can change an offset to any of the three planes and the side of the offset.
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
Notă
The sketch can be re-mapped to another already existing face using the Map Sketch - Command
The sketch can be moved in the 3D-Space using Placement.