Sketcher NeueSkizze

From FreeCAD Documentation
Revision as of 22:32, 27 March 2024 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Sketcher NeueSkizze

Menüeintrag
Skizze → Skizze erstellen
Arbeitsbereich
Sketcher
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
PartDesign NeueSkizze,SkizzeZuordnen, SkizzeAusrichten

Beschreibung

Dies erzeugt eine neue Skizze.

Man beachte, dass der Arbeitsbereich PartDesign seinen eigenen Befehl NeueSkizze hat. Bei der Arbeit an einem PartDesign-Körper ist der Gebrauch jenes Werkzeugs vorzuziehen.

Anwendung

  1. If the sketch should be attached to existing geometry: select an object with a shape, or one or more vertices, edges, and/or faces, and/or a plane.
  2. There are several ways to invoke the tool:
    • Press the Create sketch button.
    • Select the Sketch → Create sketch option from the menu.
  3. If geometry has been selected:
    1. The Sketch attachment dialog opens.
    2. Select an attachment method from the dropdown list. Or select Don't attach to ignore the selection.
    3. Press the OK button.
  4. If there is no selection, or Don't attach has been selected in the previous step:
    1. The Choose orientation dialog opens.
    2. Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
      • If the Reverse direction checkbox is not checked:
        • Top: XY-Plane
        • Front: XZ-Plane
        • Right: YZ-Plane
      • If the Reverse direction checkbox is checked:
        • Bottom: XY-Plane
        • Rear: XZ-Plane
        • Left: YZ-Plane
    3. Optionally change the Offset. The offset is measured along the Z, Y or X axis of the local coordinate system.
    4. Press the OK button.
  5. A sketch is created.
  6. The sketch is put in edit mode and the Sketcher Dialog opens.
  7. To finish edit mode see Sketcher LeaveSketch.

Notes