Szkicownik: Utwórz owal

From FreeCAD Documentation
Revision as of 15:53, 19 March 2023 by Kaktus (talk | contribs) (Created page with "Rysuje kontur wpustu przez wybranie środka dwóch półokręgów. ''(W starszych wersjach FreeCAD, przez wybranie jednego środka półkola i punktu końcowego drugiego półkola.)''")

Szkicownik: Utwórz wpust

Lokalizacja w menu
Szkic → Elementy geometryczne szkicownika → Utwórz wpust
Środowisko pracy
Szkicownik
Domyślny skrót
G S
Wprowadzono w wersji
-
Zobacz także
brak

Opis

Rysuje kontur wpustu przez wybranie środka dwóch półokręgów. (W starszych wersjach FreeCAD, przez wybranie jednego środka półkola i punktu końcowego drugiego półkola.)

When starting the tool, the mouse pointer changes to a white cross with a red slot icon. The coordinates of the pointer are shown beside it in blue in real time.

Usage

  • After pressing the Create slot toolbar button, click once to set the center of one semicircle, then move the mouse and click a second time to set center of the other semicircle.
  • Holding Ctrl when creating the second point will constrain the slot to be drawn horizontally or vertically introduced in version 0.20
  • Pressing Esc or clicking the right mouse button cancels the function.

Notes