Sketcher CreateSlot/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Podczas uruchamiania narzędzia kursor myszki zmienia wygląd na biały krzyż z czerwoną ikoną rowka. Współrzędne kursora są wyświetlane obok niego, w czasie rzeczywistym w kolorze niebieskim.")
(Created page with "==Użycie==")
Line 27: Line 27:
[[Image:SketcherCreateSlotExample.png‎]]
[[Image:SketcherCreateSlotExample.png‎]]


==Usage==
<span id="Usage"></span>
==Użycie==


* After pressing the [[File:Sketcher_CreateSlot.svg|24px]] '''Create slot''' toolbar button, click once to set the center of one semicircle, then move the mouse and click a second time to set center of the other semicircle.
* After pressing the [[File:Sketcher_CreateSlot.svg|24px]] '''Create slot''' toolbar button, click once to set the center of one semicircle, then move the mouse and click a second time to set center of the other semicircle.

Revision as of 15:54, 19 March 2023

Szkicownik: Utwórz wpust

Lokalizacja w menu
Szkic → Elementy geometryczne szkicownika → Utwórz wpust
Środowisko pracy
Szkicownik
Domyślny skrót
G S
Wprowadzono w wersji
-
Zobacz także
brak

Opis

Rysuje kontur wpustu przez wybranie środka dwóch półokręgów. (W starszych wersjach FreeCAD, przez wybranie jednego środka półkola i punktu końcowego drugiego półkola.)

Podczas uruchamiania narzędzia kursor myszki zmienia wygląd na biały krzyż z czerwoną ikoną rowka. Współrzędne kursora są wyświetlane obok niego, w czasie rzeczywistym w kolorze niebieskim.

Użycie

  • After pressing the Create slot toolbar button, click once to set the center of one semicircle, then move the mouse and click a second time to set center of the other semicircle.
  • Holding Ctrl when creating the second point will constrain the slot to be drawn horizontally or vertically introduced in version 0.20
  • Pressing Esc or clicking the right mouse button cancels the function.

Notes