Sketcher CreatePoint/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "== Cum se folosește ==")
(Created page with "* Click pe butonul {{KEY|24px Create point}}, pentru a activa funcția. * Click pe schiță pentru a crea un punct. * Apăsați {{KEY|Esc}} sau c...")
Line 10: Line 10:
== Cum se folosește ==
== Cum se folosește ==


* Click on the button {{KEY|[[Image:Sketcher CreatePoint.png|24px]] Create point}}, to activate the function.
* Click pe butonul {{KEY|[[Image:Sketcher Point.png|24px]] Create point}}, pentru a activa funcția.
* Click pe schiță pentru a crea un punct.
* Clicking in the sketch creates a point.
* Pressing {{KEY|Esc}} or clicking the right mouse button cancels the function.
* Apăsați {{KEY|Esc}} sau click butonul dreapta pentru a abandona funcția.


==Options==
==Options==

Revision as of 21:38, 3 November 2018

Sketcher CreatePoint

poziția meniului
Sketch → Sketcher geometries → Create point
Ateliere
Sketcher
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
nici unul

Descriere

Instrumentul Point creează un punct în schița curentă, care poate fi utilizată pentru construirea de elemente geometrice. Punctul este mereu un element de construcție și nu poate fi prezentat într-o vizualizarea 3D.

Point in the sketcher

Cum se folosește

  • Click pe butonul Create point, pentru a activa funcția.
  • Click pe schiță pentru a crea un punct.
  • Apăsați Esc sau click butonul dreapta pentru a abandona funcția.

Options

A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

Limitations

The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the PartDesign Point for a datum point or the Part Point instead.