Skica Napravi Krug
Sketcher CreateCircle |
Menu location |
---|
Sketch → Sketcher geometries → Create circle |
Workbenches |
Sketcher |
Default shortcut |
G C |
Introduced in version |
- |
See also |
Sketcher CreateArc |
Description
The Sketcher CreateCircle tool creates a circle by its center and a point along the circle. introduced in version 0.22: Or optionally by three points along the circle.
Usage
See also: Drawing aids.
Pos-OVP = Positional On-View-Parameters. introduced in version 0.22
Dim-OVP = Dimensional On-View-Parameters. introduced in version 0.22
- There are several ways to invoke the tool:
- Press the Center and rim point button.
- Select the Sketcher → Sketcher geometries → Create circle option from the menu.
- Right-click in the 3D view and select the Create circle option from the context menu.
- Use the keyboard shortcut: G then C.
- The cursor changes to a cross with the current tool mode icon.
- The Circle parameters section (introduced in version 0.22) is added at the top of the Sketcher Dialog.
- Optionally press the M key or select from the dropdown list in the parameters section to change the tool mode:
- Center:
- Pick the center of the circle. Or with Pos-OVP: enter its X and/or Y coordinate.
- Pick a point to define the radius of the circle. Or with Dim-OVP: enter this radius.
- 3 rim points: introduced in version 0.22
- Pick three points to define the circle. Or with Pos-OVP: enter their X and/or Y coordinates. No constraints are created for these points.
- Center:
- The circle is created and applicable Pos-OVP and Dim-OVP based constraints are added.
- If the tool runs in continue mode:
- Optionally keep creating circles.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
Sketcher
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub