Sketcher CreateBSpline
|
Menu location |
---|
Sketch → Sketcher geometries → Create B-spline |
Workbenches |
Sketcher |
Default shortcut |
G B B |
Introduced in version |
0.17 |
See also |
Sketcher periodic B-spline |
Description
This tool creates a B-spline curve from its control points. (See this page for more info about B-splines.)
A B-spline curve (in white) defined by 4 control points. Pictured are the control polygon in green (the straight lines connecting the control points) and the weight circles in dark yellow. The green digit "3" in the center refers to the degree of the B-spline and the digits "(4)" at the ends of the B-spline refer to their knot multiplicity. The red digit "3" denotes the control point weight which is defined as radius constraint to the control point circle.
Usage
- Press the
B-spline by control points button.
- Create a series of points by clicking in the 3D view. While the command is active, the created points are connected with straight lines, and a construction circle is created centered on each point.
- Optionally press D before terminating the input to define the degree of the B-spline. introduced in version 0.20
- Optionally press Backspace before terminating the input to delete the last created control point. introduced in version 0.20
- Right-click to terminate the input and generate the curve.
- Depending on preferences, the tool may remain active to trace a new curve. Right-click again to exit the command.
Notes
- After a B-spline is created, it is possible to define the weight of the control points by changing the radii of the weight circles. The equality constraints on the circles need to be deleted first. The radius constraint is arbitrary, the weight of the control points will be defined by the relative radii of the circles. It works similar to gravity: the bigger a circle is in relation to the others, the more the curve will be attracted to the control point.
- The visibility of the control polygon, the curvature comb, the degree and the knot multiplicity can be toggled on/off from the B-spline tools toolbar.
- Check out the other tools in the B-spline tools toolbar for more B-spline editing tools.
Limitations
- Many types of constraints are not supported at this time.
- The Extend tool is not supported.
- version 0.20 and below: The Split tool is not supported.
- version 0.20 and below: The shape of a B-spline curve can only be edited by dragging one of the control points. The knots lying on the curve cannot be selected.
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
![](/images/thumb/9/94/User_hub.png/24px-User_hub.png)
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub