Sketcher CreateArc
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.
Sketcher CreateArc |
Menu location |
---|
Sketch → Sketcher geometries → Create arc by center |
Workbenches |
Sketcher |
Default shortcut |
G A |
Introduced in version |
- |
See also |
Sketcher Circle |
Description
The Sketcher CreateArc tool creates an arc by its center and its endpoints. introduced in version 0.22: Or optionally by its endpoints and a point along the arc.
Arc created in Center mode with automatically applied constraints defined by entering all On-View-Parameters
Usage
See also: Drawing aids.
Pos-OVP = Positional On-View-Parameters. introduced in version 0.22
Dim-OVP = Dimensional On-View-Parameters. introduced in version 0.22
- There are several ways to invoke the tool:
- Press the Center and end points button.
- Select the Sketcher → Sketcher geometries → Create arc by center option from the menu.
- Right-click in the 3D view and select the Create arc by center option from the context menu.
- Use the keyboard shortcut: G then A.
- The cursor changes to a white cross with the current tool mode icon.
- The Arc parameters section (introduced in version 0.22) is added at the top of the Sketcher Dialog.
- Optionally press the M key or select from the dropdown list in the parameters section to change the tool Mode:
- Center:
- Pick the center of the arc. Or with Pos-OVP: enter its X and/or Y coordinate.
- Pick the start point of the arc, this also defines the radius. Or with Dim-OVP: enter the radius and/or start angle of the arc. The angle is relative to the X axis of the sketch.
- Pick the end point of the arc. Or with Dim-OVP: enter the aperture angle of the arc.
- 3 rim points: introduced in version 0.22
- Pick the start and end points of the arc. Or with Pos-OVP: enter their X and/or Y coordinates.
- Pick another point to define the radius.
- Center:
- The arc is created and applicable Pos-OVP and Dim-OVP based constraints are added.
Sketcher
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub