Sketcher: Vincolo Simmetria

From FreeCAD Documentation
Revision as of 17:32, 22 December 2013 by Renatorivo (talk | contribs) (Created page with "Il vincolo Simmetria forza due punti selezionati ad essere simmetrici rispetto ad una data linea. Entrambi i punti selezionati sono vincolati a giacere sulla normale alla line...")

Simmetria

Posizione nel menu
PartDesign → Schizzo → Simmetria
Ambiente
Schizzo, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Parallela

Il vincolo Simmetria forza due punti selezionati ad essere simmetrici rispetto ad una data linea. Entrambi i punti selezionati sono vincolati a giacere sulla normale alla linea di simmetria attraverso gli stessi due punti e sono vincolati equidistanti dalla linea.

Operation



Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.



Click on the SymmetricalConstraint icon in the Sketcher toolbar or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item. This will apply the constraint to the selected items.



This is a geometric constraint and has no editable parameters.