Sketcher: Vincolo Raggio

From FreeCAD Documentation
Revision as of 21:05, 25 October 2018 by Renatorivo (talk | contribs) (Replaced content with "== Utilizzo ==")

Raggio

Posizione nel menu
PartDesign → Schizzo → Raggio
Ambiente
Schizzo, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Distanza, Orizzontale, [[Sketcher ConstrainDistance

Y/it|Verticale]]


Descrizione

Questo vincolo forza il valore del raggio di un cerchio o di un arco a un valore specifico. Se viene selezionato più di un cerchio o arco prima di avviare il comando, un prompt chiede se tutti gli elementi selezionati devono condividere lo stesso raggio. Nel caso di una risposta affermativa, viene aggiunto un vincolo di raggio e un vincolo di uguale lunghezza a tutti gli elementi. Se la risposta è negativa, vengono creati vincoli di raggio separati per ogni cerchio o arco ma con valori uguali che è possibile modificare singolarmente dopo la creazione.

Utilizzo

  1. Pick one or more circles or arcs.
  2. Press the Constrain radius button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate. In case multiple circles/arcs were selected, all constraints will adopt this value. Edit their separate values by double-clicking on the dimension label in the 3D view; or in the Constraints list, double-click on the constraint or right-click and select Change value.
  4. Optionally the dimension label and line can be moved and rotated in the 3D view by clicking on the value and dragging while keeping the left mouse button pressed.

Note: the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.