Sketcher Contrainte rayon
Contrainte Radiale |
Emplacement du menu |
---|
Sketch → Contraintes d'esquisse → Contrainte radiale |
Ateliers |
Sketcher, PartDesign |
Raccourci par défaut |
R |
Introduit dans la version |
- |
Voir aussi |
Contrainte Distance, Contrainte Horizontale, Contrainte Verticale |
Description
Cette contrainte détermine et fixe la valeur du rayon d'un cercle, ou un arc à une valeur spécifique. Un seul arc de cercle peut être contrainte à la fois.
Operation
Select an arc or circle in the sketch by clicking on is ( turns dark green to indicate selection).
Apply the constraint by clicking on the Constrain Radius icon in the Sketcher toolbar or selecting the Constrain radius menu item from the Sketcher constraints sub menu of the the Sketcher (or Part Design) menu item (depending upon which workbench is selected).
The radius is constrained to have its current value when the constraint is applied.
To change the constraint value either double click on the constraint in the 3D display (turning red indicates the constraint is currently selected) or by double clicking on the constraint in the Constraints panel of the Tasks tab of the Combo View.
This will bring up a pop-up window.
Enter the desired value for the radius into the pop-up window and click OK to set the value of the constraint.
The constraint value is set to the value entered in the pop-up window.