Sketcher ConstrainParallel/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "==Descriere== Constrângerea paralelă forțează două linii drepte sau margini selectate pentru a fi paralele una cu cealaltă.")
(Created page with "==Utilizare== Schița conține două linii orientate aleatoriu.")
Line 11: Line 11:
Constrângerea paralelă forțează două linii drepte sau margini selectate pentru a fi paralele una cu cealaltă.
Constrângerea paralelă forțează două linii drepte sau margini selectate pentru a fi paralele una cu cealaltă.


==Operation==
==Utilizare==
Schița conține două linii orientate aleatoriu.
The sketch contains two randomly oriented lines.


[[File:ConstrainParallel1.png|256px]]
[[File:ConstrainParallel1.png|256px]]

Revision as of 13:56, 6 October 2018

Sketcher ConstrainParallel

Menu location
Sketch → Sketcher constraints → Constrain parallel
Workbenches
Sketcher
Default shortcut
Shift + P
Introduced in version
-
See also
Constraint Vertical, Constraint Horizontal

Descriere

Constrângerea paralelă forțează două linii drepte sau margini selectate pentru a fi paralele una cu cealaltă.

Utilizare

Schița conține două linii orientate aleatoriu.

Select both lines by clicking successively on each of them.

Apply the Constrain Parallel constraint by selecting the Constrain Parallel icon from the Sketcher constraints toolbar or by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.

The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.