Sketcher ConstrainEqual/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Użycie==")
(Created page with "Poniższy przykładowy rysunek zawiera szereg pierwotnych elementów szkicowych ''(linia, linia łamana, prostokąt, łuk i okrąg)''.")
Line 24: Line 24:
==Użycie==
==Użycie==


Poniższy przykładowy rysunek zawiera szereg pierwotnych elementów szkicowych ''(linia, linia łamana, prostokąt, łuk i okrąg)''.
The example sketch below contains a number of sketch primitives (line,poly-line, rectangle, arc and circle).


[[File:EqualConstraint1.png]]
[[File:EqualConstraint1.png]]

Revision as of 18:26, 7 November 2020

Sketcher: Wiązanie równości

Lokalizacja w menu
Szkicownik → Wiązania szkicownika → Wiązanie równości
Środowisko pracy
Szkicownik
Domyślny skrót
E
Wprowadzono w wersji
-
Zobacz także
Szkicownik: Wiązanie kąta

Opis

Wiązanie Równości wymusza, aby dwa lub więcej odcinki w linii, linii łamanej lub prostokącie miały jednakową długość. W przypadku zastosowania do łuków lub okręgów, promienie są wiązane tak, aby były równe. Wiązanie nie może być stosowane do elementów pierwotnych geometrii, które nie są tego samego typu (np. odcinki linii i łuki).

Użycie

Poniższy przykładowy rysunek zawiera szereg pierwotnych elementów szkicowych (linia, linia łamana, prostokąt, łuk i okrąg).

Select two or more line segments (e.g. line and one side of the rectangle).

Click on Constrain equal in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.

Now select the arc and the circle in the sketch.

and apply Constrain equal as before.

Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle

and apply Constrain equal as before.

Select the line segment and the arc

and apply Constrain equal as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).