Sketcher ConstrainDistanceY: Difference between revisions

From FreeCAD Documentation
m (Normandc moved page Constraint VerticalDistance to Sketcher ConstrainDistanceY without leaving a redirect: Part of translatable page "Constraint VerticalDistance")
No edit summary
Line 2: Line 2:
<translate>
<translate>
<!--T:1-->
<!--T:1-->
{{GuiCommand
{{GuiCommand|Name=Constraint VerticalDistance|Workbenches=[[Sketcher Workbench|Sketcher]], [[PartDesign Workbench|PartDesign]]|MenuLocation=Sketch → Sketcher constraints → Constrain vertical distance|Shortcut=Shift+V|SeeAlso=[[Constraint HorizontalDistance|Constraint HorizontalDistance]], [[Constraint Length|Constraint Length]]}}
|Name=Sketcher ConstrainDistanceY
|Workbenches=[[Sketcher Workbench|Sketcher]]
|MenuLocation=Sketch → Sketcher constraints → Constrain vertical distance
|Shortcut=Shift+V
|SeeAlso=[[Sketcher_ConstrainDistanceX|Constrain Horizontal Distance]], [[Sketcher_ConstrainDistance|Constrain Length]]
}}


====Description==== <!--T:2-->
==Description== <!--T:2-->
Fixes the vertical distance between 2 points or line ends. If only one item is selected, the distance is set to the origin.
Fixes the vertical distance between 2 points or line ends. If only one item is selected, the distance is set to the origin.


====Usage==== <!--T:3-->
==Usage== <!--T:3-->
# Pick one or two points
# Pick one or two points
# Press the {{KEY|[[File:Sketcher ConstrainDistanceY.png|24px]] '''Constrain vertical distance'''}} button.
# Activate the constraint

'''Note:''' the constraint tool can also be started with no prior selection, but will require selection of two points. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or {{KEY|ESC}} once to quit the command.

{{clear}}
{{clear}}



Revision as of 02:36, 3 October 2018

Sketcher ConstrainDistanceY

Menu location
Sketch → Sketcher constraints → Constrain vertical distance
Workbenches
Sketcher
Default shortcut
Shift+V
Introduced in version
-
See also
Constrain Horizontal Distance, Constrain Length

Description

Fixes the vertical distance between 2 points or line ends. If only one item is selected, the distance is set to the origin.

Usage

  1. Pick one or two points
  2. Press the Constrain vertical distance button.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.