Sketcher: Vincolo Distanza

From FreeCAD Documentation
Revision as of 03:49, 3 October 2018 by Normandc (talk | contribs) (Created page with "==Uso==")

Lunghezza

Posizione nel menu
Sketch → Vincolo → Lunghezza
Ambiente
Schizzo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Distanza Orizzontale, Distanza Verticale

Descrizione

Il vincolo Lunghezza impone la lunghezza di una linea, la distanza perpendicolare tra un punto e una linea o la distanza tra due punti ad assumere un valore specifico.

Uso

  1. Pick two points or one line or one point and one line.
  2. Press the Constrain distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection. To set the perpendicular distance between a point and a line, the point needs to be selected first. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.

Quando sono applicabili conviene usare il vincolo Distanza Orizzontale o il vincolo Distanza Verticale. Questi vincoli sono più robusti e più veloci da calcolare rispetto al vincolo di Lunghezza documentato qui.