Sketcher ConstrainDistance/cs: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 4: Line 4:
|[[Sketcher_ConstrainRadius|Radius]]
|[[Sketcher_ConstrainRadius|Radius]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench|Sketcher]]
|IconL=Constraint_VerticalDistance.svg
|IconL=Sketcher_ConstrainDistanceY.svg
|IconR=Constraint_Radius.svg
|IconR=Sketcher_ConstrainRadius.svg
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg
}}
}}
Line 49: Line 49:
|[[Sketcher_ConstrainRadius|Radius]]
|[[Sketcher_ConstrainRadius|Radius]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench|Sketcher]]
|IconL=Constraint_VerticalDistance.svg
|IconL=Sketcher_ConstrainDistanceY.svg
|IconR=Constraint_Radius.svg
|IconR=Sketcher_ConstrainRadius.svg
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg
}}
}}

Revision as of 16:11, 30 December 2020

Constraint Length

Umístění Menu
Sketch → Vazby náčrtu → Vazba vzdálenosti
Pracovní stoly
Sketcher
Výchozí zástupce
Shift + D
Představen ve verzi
-
Viz také
Constrain horizontal distance, Constrain vertical distance

Popis

Vazba Délka nastavuje délku přímky, kolmou vzdálenost mezi bodem a přímkou nebo vzdálenost mezi dvěma body.

Použití

  1. Pick two points or one line or one point and one line.
  2. Invoke the command several ways:
    • Press the Constrain distance button in the Sketcher toolbar.
    • Use the Shift + D keyboard shortcut. (D is for Distance)
    • Use the Sketch → Sketcher constraints → Constrain distance entry from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection. To set the perpendicular distance between a point and a line, the point needs to be selected first. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.

Hint

Rada

Pokud uvažujete o její aplikaci, zamyslete se raději nad použitím vazeb Horizontální vzdálenost nebo vertikální vzdálenost. Tyto vazby jsou robustnější a mají rychlejší výpočet než zde popisovaná vazba Délka.