Sketcher ConstrainCoincident
Sketcher ConstrainCoincident |
Menu location |
---|
Sketch → Sketcher constraints → Constrain coincident |
Workbenches |
Sketcher |
Default shortcut |
C |
Introduced in version |
- |
See also |
Sketcher Constrain Lock, Sketcher Constrain Point onto Object |
Description
Create a coincident constraint on the selected item
This constraint tool takes two points as its argument and serves to make the two points coincident. (Meaning to make them as-one-point).
In practical terms this constraint tool is useful when there is a break in a profile for example - where two lines end near each other and need to be joined - a coincident constraint on their end-points will close the gap.
Usage
As stated above, this tool takes two arguments - both are points.
- First, it is necessary to highlight two distinct points. (Note: this will not work if, for example, you attempt to select the start and end point of the same line).
- Highlighting of a drawing item is achieved by moving the mouse over the item and clicking the left-mouse-button.
- A highlighted item will change its color to green. (This color can be customized in Editing → Preference → Display → Colors → Selection)
- Subsequent items can be highlighted by repeating the above procedure(s). Note: it's unnecessary to hold-down any special key like Ctrl to achieve multiple item selection in a drawing.
- Once you have two points highlighted, you can invoke the command using several methods:
- Pressing on the Coinstrain coincident constraint button in the toolbar.
- Using the C keyboard shortcut.
- Using the Sketch → Sketcher constraints → Constrain coincident entry in the top menu.
Result: the command will cause the two points to become coincident and be replaced by a single point.
Note: In order to make two points coincident, FreeCAD must out of necessity move one (or both) of the original points.
Scripting
The constraint can be created from macros and from the python console by using the following command:
Sketch.addConstraint(Sketcher.Constraint('Coincident',LineFixed,PointOfLineFixed,LineMoving,PointOfLineMoving))
where :
Sketch
is a sketch objectLineFixed
is the number of the line, that will not move by applying the constraintPointOfLineFixed
indicates which vertex ofLineFixed
has to fulfill the constraintLineMoving
is the number of the line, that will move by applying the constraintPointOfLineMoving
indicates which vertex ofLineMoving
has to fulfill the constraint
The Scritping Sketcher constraints in Python page explains the values which can be used for PointOfLineFixed
and PointOfLineMoving
, and contains further examples on how to create constraints from Python scripts.
The two constrained items must be starting point (1) or end point (2) vertices, or center points (3). The coincident constraint cannot be used directly with edges (0), and straight lines do not have a center point. The other combinations can be emulated using other constraints:
- The Symmetric constraint can be used to place an extremity on the midpoint of a straight line. This emulates 3 (center) for straight lines.
- A midpoint-to-midpoint placement can be achieved by creating a new Point and using two Symmetric constraints so that it lays on the midpoint of both edges. This emulates 3 (center) for straight lines.
- Instead of using the values 1 or 2 (vertex) and 0 (edge), a vertex can be constrained to lie along on an edge using a PointOnObject constraint. Note that with this constraint, the point can lie anywhere on the full extension of a segment or curve (i.e. before the start point or outside of the end point).
- Instead of using the values 0 (edge) and 0 (edge), a co-linear placement can be obtained by combining a PointOnObject constraint and a Parallel constraint
- Instead of using the values 0 (edge) and 0 (edge), two edges can be made identical by using two Coincident constraint, one for each pair of extremities.
- Instead of using the values 0 (edge) and 0 (edge), two Circle can be made identical by creating a new Line and using two Coincident constraint to place both centers on one extremity of the line, and two PointOnObject constraints to place the other extremity on the circumference of both circles. To get rid of the extra degree of freedom, a horizontal or vertical constraint can be used to lock the line in place.
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub