Sketcher ConstrainBlock: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
No edit summary
Line 12: Line 12:


<!--T:3-->
<!--T:3-->
'''Constrain Block''' blocks a geometric element in place with a single constraint. Its main intended use is to work with [[Sketcher_CreateBSpline|B-Splines]] which can be difficult to fully constrain otherwise.
'''Constrain Block''' blocks a geometric element in place with a single constraint. Its main intended use is to work with [[Sketcher_CreateBSpline|B-Splines]] which can be difficult to fully constrain otherwise.


<!--T:4-->
<!--T:4-->

Revision as of 04:39, 1 October 2018

Sketcher ConstrainBlock

Menu location
Sketch → Sketcher constraints → Constrain Block
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
Constrain Lock

Description

Constrain Block blocks a geometric element in place with a single constraint. Its main intended use is to work with B-Splines which can be difficult to fully constrain otherwise.

introduced in version 0.17

How to use

  1. Select an element to constrain;
  2. Press the Constrain Block button.

Note: step 1 and 2 can be reversed.