Sketcher CompCreateConic: Difference between revisions

From FreeCAD Documentation
m (delete "SeeAlso" section)
No edit summary
Line 12: Line 12:


<!--T:4-->
<!--T:4-->
'''Create a conic''' is an icon button in the Sketcher geometries toolbar that groups tools to create curves based on a section of a cone. Click on the down arrow to its right to expand the icons below it and select a tool.
'''Create a conic''' is an icon button [[Image:Sketcher_CompCreateConic.png|64px]] in the Sketcher geometries toolbar that groups tools to create curves based on a section of a cone. Click on the down arrow to its right to expand the icons below it and select a tool.


==Types of conics== <!--T:5-->
==Types of conics== <!--T:5-->

Revision as of 15:13, 2 November 2019

Sketcher Conics

Menu location
None (toolbar only)
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
None

Description

Create a conic is an icon button in the Sketcher geometries toolbar that groups tools to create curves based on a section of a cone. Click on the down arrow to its right to expand the icons below it and select a tool.

Types of conics

  • Ellipse by center : Draws an ellipse by center point, major radius point and minor radius point.
  • Ellipse by 3 points : Draws an ellipse by major diameter (2 points) and minor radius point.
  • Arc of ellipse : Draws an arc of ellipse by center point, major radius point, starting point and ending point.
  • Arc of hyperbola: v0.17 and above Draws an arc of hyperbola.
  • Arc of parabola: v0.17 and above Draws an arc of parabola.