SheetMetal Extrude
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
SheetMetal Extrude |
Menu location |
---|
SheetMetal → Extrude |
Workbenches |
SheetMetal |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The SheetMetal Extrude tool extends a sheet metal face.
Usage
To Extend the face:
- Start with a base plate or sheet, select a thin face representing the thickness of the metal sheet
- Click on the Extrude tool to extend the face.
Note: The workbench does not have a tool to create a base plate, so you need to start your model with one of the following methods:
- Method 1: Part Cube
- Method 2: An extruded solid made with Part Extrude from either a:
- Draft Rectangle or a
- Draft Wire or a
- Sketch
- Method 3: PartDesign Body containing either an
- additive box or a
- PartDesign Pad made from a Sketch.
Note: In an extension operation, set Refine = true
.
Properties
Data
Base
- Datagap1: Gap from the left side.
- Datagap2: Gap from the right side.
- Datalength: Length of the wall.