Skriptgenerierte Objekte
Einführung
Neben den Standard Objekttypen wie Anmerkungen, Netze und Teileobjekte bietet FreeCAD auch die erstaunliche Möglichkeit, 100% python geschriebene Objekte zu erstellen, die als Python Funktionen bezeichnet werden. Diese Objekte verhalten sich genau wie jedes andere FreeCAD Objekt und werden beim Speichern/Laden von Dateien automatisch gespeichert und wiederhergestellt.
Eine Besonderheit muss verstanden werden, diese Objekte werden in FreeCAD FcStd Dateien mit dem Python Modul json gespeichert. Dieses Modul wandelt ein Python Objekt in eine Zeichenkette um, so dass es der gespeicherten Datei hinzugefügt werden kann. Beim Laden verwendet das json Modul diese Zeichenfolge, um das ursprüngliche Objekt wieder zu erzeugen, vorausgesetzt, es hat Zugriff auf den Quellcode, der das Objekt erzeugt hat. Das heißt, wenn Sie ein solches benutzerdefiniertes Objekt speichern und es auf einem Rechner öffnen, auf dem der Python Code, der das Objekt erzeugt hat, nicht vorhanden ist, wird das Objekt nicht neu erstellt. Wenn Sie solche Objekte an andere verteilen, müssen Sie das Python Skript, das das Objekt erzeugt hat, zusammen verteilen.
Python Funktionen folgen der gleichen Regel wie alle FreeCAD Funktionen: Sie sind in App- und einen GUI Teile getrennt. Der App-Teil, das Dokument-Objekt, definiert die Geometrie unseres Objekts, während sein GUI-Teil, das View-Provider-Objekt, definiert, wie das Objekt auf dem Bildschirm gezeichnet wird. Das Ansichtsprovider-Objekt ist, wie jede andere FreeCAD-Funktion, nur verfügbar, wenn Sie FreeCAD in seiner eigenen GUI ausführen. Es stehen mehrere Eigenschaften und Methoden zur Verfügung, um Ihr Objekt zu erstellen. Die Eigenschaften müssen zu einem der vordefinierten Eigenschaftstypen gehören, die FreeCAD anbietet, und werden im Eigenschaften-Ansichtsfenster angezeigt, damit sie vom Benutzer bearbeitet werden können. Auf diese Weise sind FeaturePython Objekte wirklich und vollständig parametrisch. Sie können Eigenschaften für das Objekt und sein Ansichtsobjekt getrennt definieren.
Tip: In früheren Versionen haben wir das Python Modul cPickle verwendet. Dieses Modul führt jedoch willkürlichen Code aus und verursacht damit ein Sicherheitsproblem. Daher sind wir zu Pythons json Modul übergegangen.
Grundlegendes Beispiel
Das folgende Beispiel ist zusammen mit einigen anderen Beispielen in der src/Mod/TemplatePyMod/FeaturePython.py Datei zu finden:
'''Examples for a feature class and its view provider.'''
import FreeCAD, FreeCADGui
from pivy import coin
class Box:
def __init__(self, obj):
'''Add some custom properties to our box feature'''
obj.addProperty("App::PropertyLength","Length","Box","Length of the box").Length=1.0
obj.addProperty("App::PropertyLength","Width","Box","Width of the box").Width=1.0
obj.addProperty("App::PropertyLength","Height","Box", "Height of the box").Height=1.0
obj.Proxy = self
def onChanged(self, fp, prop):
'''Do something when a property has changed'''
FreeCAD.Console.PrintMessage("Change property: " + str(prop) + "\n")
def execute(self, fp):
'''Do something when doing a recomputation, this method is mandatory'''
FreeCAD.Console.PrintMessage("Recompute Python Box feature\n")
class ViewProviderBox:
def __init__(self, obj):
'''Set this object to the proxy object of the actual view provider'''
obj.addProperty("App::PropertyColor","Color","Box","Color of the box").Color=(1.0,0.0,0.0)
obj.Proxy = self
def attach(self, obj):
'''Setup the scene sub-graph of the view provider, this method is mandatory'''
self.shaded = coin.SoGroup()
self.wireframe = coin.SoGroup()
self.scale = coin.SoScale()
self.color = coin.SoBaseColor()
data=coin.SoCube()
self.shaded.addChild(self.scale)
self.shaded.addChild(self.color)
self.shaded.addChild(data)
obj.addDisplayMode(self.shaded,"Shaded");
style=coin.SoDrawStyle()
style.style = coin.SoDrawStyle.LINES
self.wireframe.addChild(style)
self.wireframe.addChild(self.scale)
self.wireframe.addChild(self.color)
self.wireframe.addChild(data)
obj.addDisplayMode(self.wireframe,"Wireframe");
self.onChanged(obj,"Color")
def updateData(self, fp, prop):
'''If a property of the handled feature has changed we have the chance to handle this here'''
# fp is the handled feature, prop is the name of the property that has changed
l = fp.getPropertyByName("Length")
w = fp.getPropertyByName("Width")
h = fp.getPropertyByName("Height")
self.scale.scaleFactor.setValue(float(l),float(w),float(h))
pass
def getDisplayModes(self,obj):
'''Return a list of display modes.'''
modes=[]
modes.append("Shaded")
modes.append("Wireframe")
return modes
def getDefaultDisplayMode(self):
'''Return the name of the default display mode. It must be defined in getDisplayModes.'''
return "Shaded"
def setDisplayMode(self,mode):
'''Map the display mode defined in attach with those defined in getDisplayModes.\
Since they have the same names nothing needs to be done. This method is optional'''
return mode
def onChanged(self, vp, prop):
'''Here we can do something when a single property got changed'''
FreeCAD.Console.PrintMessage("Change property: " + str(prop) + "\n")
if prop == "Color":
c = vp.getPropertyByName("Color")
self.color.rgb.setValue(c[0],c[1],c[2])
def getIcon(self):
'''Return the icon in XPM format which will appear in the tree view. This method is\
optional and if not defined a default icon is shown.'''
return """
/* XPM */
static const char * ViewProviderBox_xpm[] = {
"16 16 6 1",
" c None",
". c #141010",
"+ c #615BD2",
"@ c #C39D55",
"# c #000000",
"$ c #57C355",
" ........",
" ......++..+..",
" .@@@@.++..++.",
" .@@@@.++..++.",
" .@@ .++++++.",
" ..@@ .++..++.",
"###@@@@ .++..++.",
"##$.@@$#.++++++.",
"#$#$.$$$........",
"#$$####### ",
"#$$#$$$$$# ",
"#$$#$$$$$# ",
"#$$#$$$$$# ",
" #$#$$$$$# ",
" ##$$$$$# ",
" ####### "};
"""
def __getstate__(self):
'''When saving the document this object gets stored using Python's json module.\
Since we have some un-serializable parts here -- the Coin stuff -- we must define this method\
to return a tuple of all serializable objects or None.'''
return None
def __setstate__(self,state):
'''When restoring the serialized object from document we have the chance to set some internals here.\
Since no data were serialized nothing needs to be done here.'''
return None
def makeBox():
FreeCAD.newDocument()
a=FreeCAD.ActiveDocument.addObject("App::FeaturePython","Box")
Box(a)
ViewProviderBox(a.ViewObject)
makeBox()
Things to note
If your object relies on being recomputed as soon as it is created, you must do this manually in the __init__
function as it is not called automatically. This example does not require it because the onChanged
method of the Box
class has the same effect as the execute
function, but the examples below rely on being recomputed before anything is displayed in the 3D view. In the examples, this is done manually with ActiveDocument.recompute()
but in more complex scenarios you need to decide where to recompute either the whole document or the FeaturePython object.
This example produces a number of exception stack traces in the report view window. This is because the onChanged
method of the Box
class is called each time a property is added in __init__
. When the first one is added, the Width and Height properties don't exist yet and so the attempt to access them fails.
Eine Erklärung von __getstate__
und __setstate__
findest du im Forumsbeitrag obj.Proxy.Type ist ein Verzeichnis, keine Zeichenfolge.
Verfügbare Methoden
Siehe FunktionPython Methoden für die vollständige Referenz.
Verfügbare Eigenschaften
Eigenschaften sind die wahren Bausteine von FeaturePython-Gegenständen. Durch ist der Benutzer im Stande, mit einem Objekt zu interagieren und es zu ändern. Nach dem Erstellen eines neuen FeaturePython-Objekts in Ihrem Dokument( a=FreeCAD.ActiveDocument.addObject("App::FeaturePython","Box") ), können eine Liste der verfügbaren Eigenschaften bekommen, indem Sie folgendes eingeben:
obj.supportedProperties()
Sie werden eine Liste von verfügbaren Eigenschaften bekommen mit:
App::PropertyBool
App::PropertyBoolList
App::PropertyFloat
App::PropertyFloatList
App::PropertyFloatConstraint
App::PropertyQuantity
App::PropertyQuantityConstraint
App::PropertyAngle
App::PropertyDistance
App::PropertyLength
App::PropertySpeed
App::PropertyAcceleration
App::PropertyForce
App::PropertyPressure
App::PropertyInteger
App::PropertyIntegerConstraint
App::PropertyPercent
App::PropertyEnumeration
App::PropertyIntegerList
App::PropertyIntegerSet
App::PropertyMap
App::PropertyString
App::PropertyUUID
App::PropertyFont
App::PropertyStringList
App::PropertyLink
App::PropertyLinkSub
App::PropertyLinkList
App::PropertyLinkSubList
App::PropertyMatrix
App::PropertyVector
App::PropertyVectorList
App::PropertyPlacement
App::PropertyPlacementLink
App::PropertyPlacementList
App::PropertyColor
App::PropertyColorList
App::PropertyMaterial
App::PropertyPath
App::PropertyFile
App::PropertyFileIncluded
App::PropertyPythonObject
Part::PropertyPartShape
Part::PropertyGeometryList
Part::PropertyShapeHistory
Part::PropertyFilletEdges
Sketcher::PropertyConstraintList
Beim Hinzufügen von Eigenschaften zu benutzerdefinierten Objekte, achten Sie bitte auf folgendes:
- Verwenden Sie keine Zeichen "<" oder ">" in den Eigenschaftes-Beschreibungen (das würde den XML-Teil in der .Fcstd-Datei zerbrechen)
- Eigenschaften werden alphabetisch in einer .fcstd Datei gespeichert. Wenn Sie eine Form("Shape") in Ihren Eigenschaften haben, wird jede Eigenschaft, deren Name in alphabetischen Reihenfolge nach "Shape" kommt, auch nach der Form geladen, was zu seltsamen Verhaltensweisen führen kann.
A complete list of property attributes can be seen in the PropertyStandard C++ header file. For instance, if you want to allow the user to enter only a limited range of values (e.g. using PropertyIntegerConstraint), in Python you will assign a tuple containing not only the property value, but also the lower and upper limit as well as the stepsize, as below:
prop = (value, lower, upper, stepsize)
Eigenschaftstyp
Standardmäßig können die Eigenschaften aktualisiert werden. Es ist möglich, die Eigenschaften schreibgeschützt zu machen, zum Beispiel für den Fall, dass man das Ergebnis einer Methode anzeigen möchte. Es ist auch möglich, die Eigenschaft auszublenden. Der Eigenschaftstyp kann festgelegt werden mit
obj.setEditorMode("MyPropertyName", mode)
wobei mode ein kurzer int ist, der gesetzt werden kann auf:
0 -- Standardmodus, Lesen und Schreiben 1 -- Nur-Lesen 2 -- Versteckt
The EditorModes are not set at FreeCAD file reload. This could to be done by the __setstate__ function. See http://forum.freecadweb.org/viewtopic.php?f=18&t=13460&start=10#p108072. By using the setEditorMode the properties are only read only in PropertyEditor. They could still be changed from python. To really make them read only the setting has to be passed directly inside the addProperty function. See http://forum.freecadweb.org/viewtopic.php?f=18&t=13460&start=20#p109709 for an example.
Using the direct setting in the addProperty function, you also have more possibilities. In particular, an interesting one is mark a property as an output property. This way FreeCAD won't mark the feature as touched when changing it (so no need to recompute).
Example of output property (see also https://forum.freecadweb.org/viewtopic.php?t=24928):
obj.addProperty("App::PropertyString","MyCustomProperty","","",8)
The property types that can be set at last parameter of the addProperty function are:
0 -- Prop_None, No special property type 1 -- Prop_ReadOnly, Property is read-only in the editor 2 -- Prop_Transient, Property won't be saved to file 4 -- Prop_Hidden, Property won't appear in the editor 8 -- Prop_Output, Modified property doesn't touch its parent container 16 -- Prop_NoRecompute, Modified property doesn't touch its container for recompute
You can find these different property types defined in the source code C++ header for PropertyContainer
Andere komplexere Beispiele
Dieses Beispiel macht vom Part Modul Gebrauch, um ein Oktaeder zu schaffen, erstellt dann seine coin Darstellung mit pivy.
Das Erste ist das Documentobjekt selbst:
import FreeCAD, FreeCADGui, Part
import pivy
from pivy import coin
class Octahedron:
def __init__(self, obj):
"Add some custom properties to our box feature"
obj.addProperty("App::PropertyLength","Length","Octahedron","Length of the octahedron").Length=1.0
obj.addProperty("App::PropertyLength","Width","Octahedron","Width of the octahedron").Width=1.0
obj.addProperty("App::PropertyLength","Height","Octahedron", "Height of the octahedron").Height=1.0
obj.addProperty("Part::PropertyPartShape","Shape","Octahedron", "Shape of the octahedron")
obj.Proxy = self
def execute(self, fp):
# Define six vetices for the shape
v1 = FreeCAD.Vector(0,0,0)
v2 = FreeCAD.Vector(fp.Length,0,0)
v3 = FreeCAD.Vector(0,fp.Width,0)
v4 = FreeCAD.Vector(fp.Length,fp.Width,0)
v5 = FreeCAD.Vector(fp.Length/2,fp.Width/2,fp.Height/2)
v6 = FreeCAD.Vector(fp.Length/2,fp.Width/2,-fp.Height/2)
# Make the wires/faces
f1 = self.make_face(v1,v2,v5)
f2 = self.make_face(v2,v4,v5)
f3 = self.make_face(v4,v3,v5)
f4 = self.make_face(v3,v1,v5)
f5 = self.make_face(v2,v1,v6)
f6 = self.make_face(v4,v2,v6)
f7 = self.make_face(v3,v4,v6)
f8 = self.make_face(v1,v3,v6)
shell=Part.makeShell([f1,f2,f3,f4,f5,f6,f7,f8])
solid=Part.makeSolid(shell)
fp.Shape = solid
# helper mehod to create the faces
def make_face(self,v1,v2,v3):
wire = Part.makePolygon([v1,v2,v3,v1])
face = Part.Face(wire)
return face
verantwortlich für die Ansicht des Objekts in der 3D-Szene:
class ViewProviderOctahedron:
def __init__(self, obj):
"Set this object to the proxy object of the actual view provider"
obj.addProperty("App::PropertyColor","Color","Octahedron","Color of the octahedron").Color=(1.0,0.0,0.0)
obj.Proxy = self
def attach(self, obj):
"Setup the scene sub-graph of the view provider, this method is mandatory"
self.shaded = coin.SoGroup()
self.wireframe = coin.SoGroup()
self.scale = coin.SoScale()
self.color = coin.SoBaseColor()
self.data=coin.SoCoordinate3()
self.face=coin.SoIndexedLineSet()
self.shaded.addChild(self.scale)
self.shaded.addChild(self.color)
self.shaded.addChild(self.data)
self.shaded.addChild(self.face)
obj.addDisplayMode(self.shaded,"Shaded");
style=coin.SoDrawStyle()
style.style = coin.SoDrawStyle.LINES
self.wireframe.addChild(style)
self.wireframe.addChild(self.scale)
self.wireframe.addChild(self.color)
self.wireframe.addChild(self.data)
self.wireframe.addChild(self.face)
obj.addDisplayMode(self.wireframe,"Wireframe");
self.onChanged(obj,"Color")
def updateData(self, fp, prop):
"If a property of the handled feature has changed we have the chance to handle this here"
# fp is the handled feature, prop is the name of the property that has changed
if prop == "Shape":
s = fp.getPropertyByName("Shape")
self.data.point.setNum(6)
cnt=0
for i in s.Vertexes:
self.data.point.set1Value(cnt,i.X,i.Y,i.Z)
cnt=cnt+1
self.face.coordIndex.set1Value(0,0)
self.face.coordIndex.set1Value(1,1)
self.face.coordIndex.set1Value(2,2)
self.face.coordIndex.set1Value(3,-1)
self.face.coordIndex.set1Value(4,1)
self.face.coordIndex.set1Value(5,3)
self.face.coordIndex.set1Value(6,2)
self.face.coordIndex.set1Value(7,-1)
self.face.coordIndex.set1Value(8,3)
self.face.coordIndex.set1Value(9,4)
self.face.coordIndex.set1Value(10,2)
self.face.coordIndex.set1Value(11,-1)
self.face.coordIndex.set1Value(12,4)
self.face.coordIndex.set1Value(13,0)
self.face.coordIndex.set1Value(14,2)
self.face.coordIndex.set1Value(15,-1)
self.face.coordIndex.set1Value(16,1)
self.face.coordIndex.set1Value(17,0)
self.face.coordIndex.set1Value(18,5)
self.face.coordIndex.set1Value(19,-1)
self.face.coordIndex.set1Value(20,3)
self.face.coordIndex.set1Value(21,1)
self.face.coordIndex.set1Value(22,5)
self.face.coordIndex.set1Value(23,-1)
self.face.coordIndex.set1Value(24,4)
self.face.coordIndex.set1Value(25,3)
self.face.coordIndex.set1Value(26,5)
self.face.coordIndex.set1Value(27,-1)
self.face.coordIndex.set1Value(28,0)
self.face.coordIndex.set1Value(29,4)
self.face.coordIndex.set1Value(30,5)
self.face.coordIndex.set1Value(31,-1)
def getDisplayModes(self,obj):
"Return a list of display modes."
modes=[]
modes.append("Shaded")
modes.append("Wireframe")
return modes
def getDefaultDisplayMode(self):
"Return the name of the default display mode. It must be defined in getDisplayModes."
return "Shaded"
def setDisplayMode(self,mode):
return mode
def onChanged(self, vp, prop):
"Here we can do something when a single property got changed"
FreeCAD.Console.PrintMessage("Change property: " + str(prop) + "\n")
if prop == "Color":
c = vp.getPropertyByName("Color")
self.color.rgb.setValue(c[0],c[1],c[2])
def getIcon(self):
return """
/* XPM */
static const char * ViewProviderBox_xpm[] = {
"16 16 6 1",
" c None",
". c #141010",
"+ c #615BD2",
"@ c #C39D55",
"# c #000000",
"$ c #57C355",
" ........",
" ......++..+..",
" .@@@@.++..++.",
" .@@@@.++..++.",
" .@@ .++++++.",
" ..@@ .++..++.",
"###@@@@ .++..++.",
"##$.@@$#.++++++.",
"#$#$.$$$........",
"#$$####### ",
"#$$#$$$$$# ",
"#$$#$$$$$# ",
"#$$#$$$$$# ",
" #$#$$$$$# ",
" ##$$$$$# ",
" ####### "};
"""
def __getstate__(self):
return None
def __setstate__(self,state):
return None
Schließlich, sobald unser Objekt und sein Darstellungs-Objekt definiert sind, müssen wir sie nur noch aufrufen:
FreeCAD.newDocument()
a=FreeCAD.ActiveDocument.addObject("App::FeaturePython","Octahedron")
Octahedron(a)
ViewProviderOctahedron(a.ViewObject)
Objekte wählbar machen
Wollen Sie Ihr Objekt wählbar machen, oder zumindest ein Teil davon, indem Sie im Editor darauf klicken, müssen Sie seine coin-Geometrie in einen SoFCSelection-Knoten enibinden. Verfügt Ihr Objekt über komplexe Darstellung, mit Widgets, Anmerkungen, etc., möchten Sie vielleicht nur einen Teil davon in einem SoFCSelection einschliessen. Alles, was ein SoFCSelection ist, wird ständig durch FreeCAD gescannt, um eine Auswahl/Vorwahl zu entdecken, der Sinn dabei ist, zu versuchen, es nicht mit unnötigen Abtastungen zu überlasten. Folgendes würden Sie tun, um einen self.face vom Beispiel oben einzuschließen:
Once the parts of the scenegraph that are to be selectable are inside SoFCSelection nodes, you then need to provide two methods to handle the selection path. The selection path can take the form of a string giving the names of each element in the path, or of an array of scenegraph objects. The two methods you provide are getDetailPath
, which converts from a string path to an array of scenegraph objects, and getElementPicked
, which takes an element which has been clicked on in the scenegraph and returns its string name (note, not its string path).
Here is the molecule example above, adapted to make the elements of the molecule selectable:
class Molecule:
def __init__(self, obj):
''' Add two point properties '''
obj.addProperty("App::PropertyVector","p1","Line","Start point")
obj.addProperty("App::PropertyVector","p2","Line","End point").p2=FreeCAD.Vector(5,0,0)
obj.Proxy = self
def onChanged(self, fp, prop):
if prop == "p1" or prop == "p2":
''' Print the name of the property that has changed '''
fp.Shape = Part.makeLine(fp.p1,fp.p2)
def execute(self, fp):
''' Print a short message when doing a recomputation, this method is mandatory '''
fp.Shape = Part.makeLine(fp.p1,fp.p2)
class ViewProviderMolecule:
def __init__(self, obj):
''' Set this object to the proxy object of the actual view provider '''
obj.Proxy = self
self.ViewObject = obj
sep1=coin.SoSeparator()
sel1 = coin.SoType.fromName('SoFCSelection').createInstance()
# sel1.policy.setValue(coin.SoSelection.SHIFT)
sel1.ref()
sep1.addChild(sel1)
self.trl1=coin.SoTranslation()
sel1.addChild(self.trl1)
sel1.addChild(coin.SoSphere())
sep2=coin.SoSeparator()
sel2 = coin.SoType.fromName('SoFCSelection').createInstance()
sel2.ref()
sep2.addChild(sel2)
self.trl2=coin.SoTranslation()
sel2.addChild(self.trl2)
sel2.addChild(coin.SoSphere())
obj.RootNode.addChild(sep1)
obj.RootNode.addChild(sep2)
self.updateData(obj.Object, 'p2')
self.sel1 = sel1
self.sel2 = sel2
def getDetailPath(self, subname, path, append):
vobj = self.ViewObject
if append:
path.append(vobj.RootNode)
path.append(vobj.SwitchNode)
mode = vobj.SwitchNode.whichChild.getValue()
if mode >= 0:
mode = vobj.SwitchNode.getChild(mode)
path.append(mode)
sub = Part.splitSubname(subname)[-1]
if sub == 'Atom1':
path.append(self.sel1)
elif sub == 'Atom2':
path.append(self.sel2)
else:
path.append(mode.getChild(0))
return True
def getElementPicked(self, pp):
path = pp.getPath()
if path.findNode(self.sel1) >= 0:
return 'Atom1'
if path.findNode(self.sel2) >= 0:
return 'Atom2'
raise NotImplementedError
def updateData(self, fp, prop):
"If a property of the handled feature has changed we have the chance to handle this here"
# fp is the handled feature, prop is the name of the property that has changed
if prop == "p1":
p = fp.getPropertyByName("p1")
self.trl1.translation=(p.x,p.y,p.z)
elif prop == "p2":
p = fp.getPropertyByName("p2")
self.trl2.translation=(p.x,p.y,p.z)
def __getstate__(self):
return None
def __setstate__(self,state):
return None
def makeMolecule():
FreeCAD.newDocument()
a=FreeCAD.ActiveDocument.addObject("Part::FeaturePython","Molecule")
Molecule(a)
ViewProviderMolecule(a.ViewObject)
FreeCAD.ActiveDocument.recompute()
Arbeiten mit einfachen Formen
Erstellen Sie einfach einen SoFCSelection Knoten, dann fügen Sie Ihre Geometrie-Knoten dazu hinzu, dann fügen Sie alles zu Ihrem Hauptknoten hinzu, anstatt Ihre Geometrie-Knoten direkt einzufügen. Die Form wird mittels der FreeCAD Standard-Form-Darstellung angezeigt:
import FreeCAD as App
import FreeCADGui
import FreeCAD
import Part
class Line:
def __init__(self, obj):
'''"App two point properties" '''
obj.addProperty("App::PropertyVector","p1","Line","Start point")
obj.addProperty("App::PropertyVector","p2","Line","End point").p2=FreeCAD.Vector(1,0,0)
obj.Proxy = self
def execute(self, fp):
'''"Print a short message when doing a recomputation, this method is mandatory" '''
fp.Shape = Part.makeLine(fp.p1,fp.p2)
a=FreeCAD.ActiveDocument.addObject("Part::FeaturePython","Line")
Line(a)
a.ViewObject.Proxy=0 # just set it to something different from None (this assignment is needed to run an internal notification)
FreeCAD.ActiveDocument.recompute()
Gleicher Code unter Verwendung von ViewProviderLine
import FreeCAD as App
import FreeCADGui
import FreeCAD
import Part
class Line:
def __init__(self, obj):
'''"App two point properties" '''
obj.addProperty("App::PropertyVector","p1","Line","Start point")
obj.addProperty("App::PropertyVector","p2","Line","End point").p2=FreeCAD.Vector(100,0,0)
obj.Proxy = self
def execute(self, fp):
'''"Print a short message when doing a recomputation, this method is mandatory" '''
fp.Shape = Part.makeLine(fp.p1,fp.p2)
class ViewProviderLine:
def __init__(self, obj):
''' Set this object to the proxy object of the actual view provider '''
obj.Proxy = self
def getDefaultDisplayMode(self):
''' Return the name of the default display mode. It must be defined in getDisplayModes. '''
return "Flat Lines"
a=FreeCAD.ActiveDocument.addObject("Part::FeaturePython","Line")
Line(a)
ViewProviderLine(a.ViewObject)
App.ActiveDocument.recompute()
Scenegraph Structure
You may have noticed that the examples above construct their scenegraphs in slightly different ways. Some use obj.addDisplayMode(node, "modename")
while others use obj.SwitchNode.getChild(x).addChild(y)
.
Each feature in a FreeCAD document is based the following scenegraph structure:
RootNode
\- SwitchNode
\- Shaded
- Wireframe
- etc
The SwitchNode
displays only one of its children, depending on which display mode is selection in FreeCAD.
The examples which use addDisplayMode
are constructing their scenegraphs solely out of coin3d scenegraph elements. Under the covers, addDisplayMode
adds a new child to the SwitchNode
; the name of that node will match the display mode it was passed.
The examples which use SwitchNode.getChild(x).addChild
also construct part of their geometry using functions from the Part workbench, such as fp.Shape = Part.makeLine(fp.p1,fp.p2)
. This constructs the different display mode scenegraphs under the SwitchNode
; when we later come to add coin3d elements to the scenegraph, we need to add them to the existing display mode scenegraphs using addChild
rather than creating a new child of the SwitchNode
.
When using addDisplayMode()
to add geometry to the scenegraph, each display mode should have its own node which is passed to addDisplayMode()
; don't reuse the same node for this. Doing so will confuse the selection mechanism. It's okay if each display mode's node has the same geometry nodes added below it, just the root of each display mode needs to be distinct.
Here is the above molecule example, adapted to be drawn only with Coin3D scenegraph objects instead of using objects from the Part workbench:
import Part
from pivy import coin
class Molecule:
def __init__(self, obj):
''' Add two point properties '''
obj.addProperty("App::PropertyVector","p1","Line","Start point")
obj.addProperty("App::PropertyVector","p2","Line","End point").p2=FreeCAD.Vector(5,0,0)
obj.Proxy = self
def onChanged(self, fp, prop):
pass
def execute(self, fp):
''' Print a short message when doing a recomputation, this method is mandatory '''
pass
class ViewProviderMolecule:
def __init__(self, obj):
''' Set this object to the proxy object of the actual view provider '''
self.constructed = False
obj.Proxy = self
self.ViewObject = obj
def attach(self, obj):
material = coin.SoMaterial()
material.diffuseColor = (1.0, 0.0, 0.0)
material.emissiveColor = (1.0, 0.0, 0.0)
drawStyle = coin.SoDrawStyle()
drawStyle.pointSize.setValue(10)
drawStyle.style = coin.SoDrawStyle.LINES
wireframe = coin.SoGroup()
shaded = coin.SoGroup()
self.wireframe = wireframe
self.shaded = shaded
self.coords = coin.SoCoordinate3()
self.coords.point.setValues(0, 2, [FreeCAD.Vector(0, 0, 0), FreeCAD.Vector(1, 0, 0)])
wireframe += self.coords
wireframe += drawStyle
wireframe += material
shaded += self.coords
shaded += drawStyle
shaded += material
g = coin.SoGroup()
sel1 = coin.SoType.fromName('SoFCSelection').createInstance()
sel1.style = 'EMISSIVE_DIFFUSE'
p1 = coin.SoType.fromName('SoIndexedPointSet').createInstance()
p1.coordIndex.set1Value(0, 0)
sel1 += p1
g += sel1
wireframe += g
shaded += g
g = coin.SoGroup()
sel2 = coin.SoType.fromName('SoFCSelection').createInstance()
sel2.style = 'EMISSIVE_DIFFUSE'
p2 = coin.SoType.fromName('SoIndexedPointSet').createInstance()
p2.coordIndex.set1Value(0, 1)
sel2 += p2
g += sel2
wireframe += g
shaded += g
g = coin.SoGroup()
sel3 = coin.SoType.fromName('SoFCSelection').createInstance()
sel3.style = 'EMISSIVE_DIFFUSE'
p3 = coin.SoType.fromName('SoIndexedLineSet').createInstance()
p3.coordIndex.setValues(0, 2, [0, 1])
sel3 += p3
g += sel3
wireframe += g
shaded += g
obj.addDisplayMode(wireframe, 'Wireframe')
obj.addDisplayMode(shaded, 'Shaded')
self.sel1 = sel1
self.sel2 = sel2
self.sel3 = sel3
self.constructed = True
self.updateData(obj.Object, 'p2')
def getDetailPath(self, subname, path, append):
vobj = self.ViewObject
if append:
path.append(vobj.RootNode)
path.append(vobj.SwitchNode)
mode = vobj.SwitchNode.whichChild.getValue()
FreeCAD.Console.PrintWarning("getDetailPath: mode {} is active\n".format(mode))
if mode >= 0:
mode = vobj.SwitchNode.getChild(mode)
path.append(mode)
sub = Part.splitSubname(subname)[-1]
print(sub)
if sub == 'Atom1':
path.append(self.sel1)
elif sub == 'Atom2':
path.append(self.sel2)
elif sub == 'Line':
path.append(self.sel3)
else:
path.append(mode.getChild(0))
return True
def getElementPicked(self, pp):
path = pp.getPath()
if path.findNode(self.sel1) >= 0:
return 'Atom1'
if path.findNode(self.sel2) >= 0:
return 'Atom2'
if path.findNode(self.sel3) >= 0:
return 'Line'
raise NotImplementedError
def updateData(self, fp, prop):
"If a property of the handled feature has changed we have the chance to handle this here"
# fp is the handled feature, prop is the name of the property that has changed
if not self.constructed:
return
if prop == "p1":
p = fp.getPropertyByName("p1")
self.coords.point.set1Value(0, p)
elif prop == "p2":
p = fp.getPropertyByName("p2")
self.coords.point.set1Value(1, p)
def getDisplayModes(self, obj):
return ['Wireframe', 'Shaded']
def getDefaultDisplayMode(self):
return 'Shaded'
def setDisplayMode(self, mode):
return mode
def __getstate__(self):
return None
def __setstate__(self,state):
return None
def makeMolecule():
FreeCAD.newDocument()
a=FreeCAD.ActiveDocument.addObject("App::FeaturePython","Molecule")
Molecule(a)
b=ViewProviderMolecule(a.ViewObject)
a.touch()
FreeCAD.ActiveDocument.recompute()
return a,b
a,b = makeMolecule()
Weitere Informationen
Es gibt ein paar sehr interessante Forumeinträge zu geskripteten Objekten:
Additional pages:
- Scripted objects saving attributes
- Scripted objects migration
- Scripted objects with attachment
- Viewproviders
Interesting forum threads about scripted objects:
- Python object attributes lost at load
- New FeaturePython is grey
- Explanation on __getstate__ and __setstate__, official documentation
- Eigenmode frequency always 0?
- how to implement python feature's setEdit properly?
In addition to the examples presented here have a look at FreeCAD source code src/Mod/TemplatePyMod/FeaturePython.py for more examples.
- FreeCAD scripting: Python, Introduction to Python, Python scripting tutorial, FreeCAD Scripting Basics
- Modules: Builtin modules, Units, Quantity
- Workbenches: Workbench creation, Gui Commands, Commands, Installing more workbenches
- Meshes and Parts: Mesh Scripting, Topological data scripting, Mesh to Part, PythonOCC
- Parametric objects: Scripted objects, Viewproviders (Custom icon in tree view)
- Scenegraph: Coin (Inventor) scenegraph, Pivy
- Graphical interface: Interface creation, Interface creation completely in Python (1, 2, 3, 4, 5), PySide, PySide examples beginner, intermediate, advanced
- Macros: Macros, How to install macros
- Embedding: Embedding FreeCAD, Embedding FreeCADGui
- Other: Expressions, Code snippets, Line drawing function, FreeCAD vector math library (deprecated)
- Hubs: User hub, Power users hub, Developer hub