Robot: Inserisci un robot

From FreeCAD Documentation
Revision as of 22:26, 9 March 2016 by FuzzyBot (talk | contribs) (Updating to match new version of source page)


Inserisci un robot

Posizione nel menu
Robot → Inserisci un robot
Ambiente
Robot
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Utilizzo

Inserting different/more robots can be done in two ways.

  • via the top menu
  1. Select Robot Insert Robots from the top menu.
  2. Select one of the four pre-defined robots.
  • via the "Tasks"-Tab
  1. Make sure a new document is/was created and activated (activate via double-click on document in tree-view).
  2. Switch to the "Tasks"-Tab in the tree view.
  3. Select one of the four pre-defined robots.

Limitations

[0.15/0.16]
Only robots with up to six axes with rotational movement are definable.
No robots with translational movements possible.
The robot must be defined via code and a vrml-file, for more info refer to Robot 6-Axis.

Notes

The pre-defined robots are

  • KUKA IR500
  • KUKA IR210
  • KUKA IR125
  • KUKA IR16