Reverse Engineering Workbench: Difference between revisions

From FreeCAD Documentation
No edit summary
(Docnav)
Line 4: Line 4:
<!--T:7-->
<!--T:7-->
{{Docnav
{{Docnav
|[[Raytracing_Workbench|Raytracing Workbench]]
|[[Points_Workbench|Points Workbench]]
|[[Robot_Workbench|Robot Workbench]]
|[[Robot_Workbench|Robot Workbench]]
|IconL=Workbench_Raytracing.svg
|IconL=Workbench_Points.svg
|IconR=Workbench_Robot.svg
|IconR=Workbench_Robot.svg
}}
}}
Line 37: Line 37:
<!--T:2-->
<!--T:2-->
{{Docnav
{{Docnav
|[[Raytracing_Workbench|Raytracing Workbench]]
|[[Points_Workbench|Points Workbench]]
|[[Robot_Workbench|Robot Workbench]]
|[[Robot_Workbench|Robot Workbench]]
|IconL=Workbench_Raytracing.svg
|IconL=Workbench_Points.svg
|IconR=Workbench_Robot.svg
|IconR=Workbench_Robot.svg
}}
}}

Revision as of 15:55, 3 May 2023

Reverse Engineering workbench icon

Introduction

The Reverse Engineering Workbench is intended to give you specific tools to convert shapes, solids, and meshes into parametric FreeCAD features. It is still in development.

At the moment there is no functionality present in this workbench. It is used as a sandbox by the programmers.

Tools

The Reverse Engineering tools are all located in the Reverse Engineering menu and the Reverse Engineering toolbar that appear when you load the Reverse Engineering workbench from the workbench dropdown menu.

  • Approximate a B-spline surface:

Development

Link to appropriate threads discussing this workbench