Reinforcement UShapeRebar/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Lo strumento {{KEY|16px Armatura a U}} consente all'utente di creare una barra di rinforzo piegata a U (due ganci) nell'elemento strutturale.") |
Renatorivo (talk | contribs) (Created page with "== Utilizzo ==") |
||
Line 7: | Line 7: | ||
[[Image:Footing UShapeRebar.png|800px]] |
[[Image:Footing UShapeRebar.png|800px]] |
||
== |
== Utilizzo == |
||
# Create a [[Arch Structure|structure]] element |
# Create a [[Arch Structure|structure]] element |
Revision as of 09:26, 11 February 2018
Armatura a U |
Posizione nel menu |
---|
Arch → Strumenti armatura |
Ambienti |
Arch |
Avvio veloce |
None |
Vedere anche |
Armatura, Armatura dritta, Armatura a L, Armatura sagomata, Staffe armatura, Armatura elicoidale |
Questo comando fa parte del Addon Reinforcement, che è possibile installare tramite il menu Strumenti → Addons Manager |
Descrizione
Lo strumento Armatura a U consente all'utente di creare una barra di rinforzo piegata a U (due ganci) nell'elemento strutturale.
Utilizzo
- Create a structure element
- Select any face of the structure
- Then select UShape Rebar from the rebar tools
- A task panel will pop-out on the left side of the screen as shown below
- Select the desired orientation
- Give the inputs like front cover, right side cover, left side cover, bottom cover, top cover, rounding factor and diameter of the rebar
- Select the mode of distribution either amount or spacing
- If spacing is selected, a user can also opt for custom spacing
- Pick selected face is used to verify or change the face for rebar distribution
- Click OK or Apply to generate the rebars
- Click Cancel to exit the task panel
Properties
- DatiOrientation: It decides the orientation of the rebar (like a bottom, top, right and left).
- DatiFront Cover: The distance between rebar and selected face.
- DatiRight Cover: The distance between the right end of the rebar to right face of the structure.
- DatiLeft Cover: The distance between the left end of the rebar to the left face of the structure.
- DatiBottom Cover: The distance between rebar from the bottom face of the structure.
- DatiTop Cover: The distance between rebar from the top face of the structure.
- DatiRounding: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
- DatiAmount: The amount of rebars.
- DatiSpacing: The distance between the axes of each bar.
Scripting
The UShape Rebar tool can by used in macros and from the python console by using the following function:
makeUShapeRebar(FrontCover, BottomCover, RightCover, LeftCover, Diameter, Topcover, Rounding, AmountSpacingCheck, AmountSpacingValue, Orientation, Structure, Facename)
- The UShape Rebar have four different orientations:
- Bottom
- Top
- Right
- Left
- Adds a UShape reinforcing bar object to the given structural object.
- If no Structure and Facename is given, it will take user selected face as input.
- Returns the new Rebar object.
Example: Creating UShape rebar.
import Arch, UShapeRebar
structure = Arch.makeStructure(length=1000.0, width=1000.0, height=400.0)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
rebar = UShapeRebar.makeUShapeRebar(20, 20, 20, 20, 8, 20, 4, True, 10, "Bottom", structure, "Face1")
Changing properties of UShape rebar.
import UShapeRebar
UShapeRebar.editUShapeRebar(rebar, 25, 25, 25, 25, 16, 25, 2, True, 15, "Top")