Arch Barra de Refuerzo en Forma de U
Arch Barra de Refuerzo en Forma de U |
Ubicación del menú |
---|
Arch → Rebar tools |
Bancos de trabajo |
Arch |
Acceso directo |
None |
Ver también |
LShape Rebar |
Este comando es parte del Reinforcement AddOn, que puedes instalar a través del menú Tools → Addons Manager |
Descripción
La herramienta UShape Rebar permite al usuario crear una barra de refuerzo de forma de U en el elemento estructural.
Utilización
- Crear un elemento structure
- Seleccione cualquier cara de la estructura
- A continuación, seleccione UShape Rebar desde las herramientas de la barra de refuerzo
- Aparecerá un panel de tareas en el lado izquierdo de la pantalla como se muestra a continuación
- Seleccione la orientación deseada
- Proporcione las entradas como la cubierta frontal, la cubierta lateral derecha, la cubierta lateral izquierda, la cubierta inferior, la cubierta superior, el factor de redondeo y el diámetro de la barra de refuerzo
- Seleccione el modo de distribución, ya sea cantidad o espaciado
- Si se selecciona el espaciado, un usuario también puede optar por espaciado personalizado
- La selección de la cara seleccionada se usa para verificar o cambiar la cara de la distribución de barras de refuerzo
- Haga clic en OK o Apply para generar las barras de refuerzo
- Haga clic en Cancel para salir del panel de tareas
Propiedades
- DatosOrientation: It decides the orientation of the rebar (like a bottom, top, right and left).
- DatosFront Cover: The distance between rebar and selected face.
- DatosRight Cover: The distance between the right end of the rebar to right face of the structure.
- DatosLeft Cover: The distance between the left end of the rebar to the left face of the structure.
- DatosBottom Cover: The distance between rebar from the bottom face of the structure.
- DatosTop Cover: The distance between rebar from the top face of the structure.
- DatosRounding: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
- DatosAmount: The amount of rebars.
- DatosSpacing: The distance between the axes of each bar.
Programación
The UShape Rebar tool can by used in macros and from the python console by using the following function:
makeUShapeRebar(FrontCover, BottomCover, RightCover, LeftCover, Diameter, Topcover, Rounding, AmountSpacingCheck, AmountSpacingValue, Orientation, Structure, Facename)
- The UShape Rebar have four different orientations:
- Bottom
- Top
- Right
- Left
- Adds a UShape reinforcing bar object to the given structural object.
- If no Structure and Facename is given, it will take user selected face as input.
- Returns the new Rebar object.
Example: Creating UShape rebar.
import Arch, UShapeRebar
structure = Arch.makeStructure(length=1000.0, width=1000.0, height=400.0)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
rebar = UShapeRebar.makeUShapeRebar(20, 20, 20, 20, 8, 20, 4, True, 10, "Bottom", structure, "Face1")
Changing properties of UShape rebar.
import UShapeRebar
UShapeRebar.editUShapeRebar(rebar, 25, 25, 25, 25, 16, 25, 2, True, 15, "Top")