Arch: Armatura elicoidale
Armatura elicoidale |
Posizione nel menu |
---|
Arch → Rebar tools |
Ambienti |
Arch |
Avvio veloce |
None |
Vedere anche |
Armatura, Armatura a U, Armatura dritta, Armatura a L, Armatura sagomata, Staffe armatura |
Questo comando fa parte del Addon Reinforcement, che è possibile installare tramite il menu Strumenti → Addons Manager |
Descrizione
Lo strumento Armatura elicoidale crea una armatura elicoidale in un elemento strutturale selezionato.
Utilizzo
- Creare un elemento Struttura
- Selezionare una qualsiasi faccia della struttura
- Selezionare Armatura elicoidale dagli strumenti Armatura
- Sul lato sinistro dello schermo appare un pannello delle azioni come il seguente
- Selezionare l'orientamento desiderato
- Fornire i dati per front cover, right side cover, left side cover, bottom cover, top cover, rounding factor and diameter of the rebar
- Selezionare la modalità di distribuzione per la quantità e per la spaziatura
- Se la spaziatura è selezionata, l'utente può anche optare per una spaziatura personalizzata
- Cliccare sulla faccia selezionata serve per verificare o modificare la faccia per la distribuzione dell'armatura
- Cliccare OK o Apply per generare l'armatura
- Cliccare Cancel per uscire dal pannello delle azioni
Properties
- DatiSide Cover: The distance between rebar to the curved face.
- DatiTop Cover: The distance between rebar from the top face of the structure.
- DatiBottom Cover: The distance between rebar from the bottom face of the structure.
- DatiPitch: The pitch of a helix is the height of one complete helix turn, measured parallel to the axis of the helix.
- DatiDiameter: Diameter of the rebar.
Scripting
The Helical Rebar tool can by used in macros and from the python console by using the following function:
makeHelicalRebar(SideCover, BottomCover, Diameter, TopCover, Pitch, Structure, Facename)
- Adds a Straight reinforcing bar object to the given structural object.
- If no Structure and Facename is given, it will take user selected face as input.
- Here CoverAlong argument is having type tuple.
- Returns the new Rebar object.
Example:
Creating Helical rebar.
import Arch, Draft, HelicalRebar
# Creating circle
pl=FreeCAD.Placement()
pl.Rotation.Q=(0.0,-0.0,-0.0,1.0)
pl.Base=FreeCAD.Vector(-1.0,-1.0,0.0)
circle = Draft.makeCircle(radius=130.107647738,placement=pl,face=True,support=None)
Draft.autogroup(circle)
# Creating Structure element from circle
structure = Arch.makeStructure(circle)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
# Creating Helical rebar
rebar = HelicalRebar.makeHelicalRebar(20, 50, 8, 50, 50, structure, "Face2")
Changing properties of Helical rebar.
import HelicalRebar
HelicalRebar.editHelicalRebar(rebar, 20, 100, 12, 100, 100)