Reinforcement ColumnRebars TwoTiesSixRebars/fr: Difference between revisions
(Created page with "{{Caption| TwoTiesSixRebars Renfort de colonne à l'intérieur d'une colonne Arch Structure}}") |
(Created page with "==Utilisation==") |
||
Line 28: | Line 28: | ||
{{Caption| TwoTiesSixRebars Renfort de colonne à l'intérieur d'une colonne [[Arch Structure/fr|Arch Structure]]}} |
{{Caption| TwoTiesSixRebars Renfort de colonne à l'intérieur d'une colonne [[Arch Structure/fr|Arch Structure]]}} |
||
== |
==Utilisation== |
||
1. Select any face of a previously created {{Button|[[Image:Arch_Structure.svg|16px]] [[Arch Structure|Arch Structure]]}} object. <br> |
1. Select any face of a previously created {{Button|[[Image:Arch_Structure.svg|16px]] [[Arch Structure|Arch Structure]]}} object. <br> |
Revision as of 16:34, 11 October 2019
Arch Rebar Renforcement de Colonne |
Emplacement du menu |
---|
Arch → Rebar tools |
Ateliers |
Arch, BIM |
Raccourci par défaut |
Aucun |
Introduit dans la version |
0.19 |
Voir aussi |
Renforcement de Colonne, Renforcement de poutre |
Description
L'outil Renforcement de Colonen permet à l'utilisateur de créer des barres d'armature à l'intérieur d'une colonne Arch Structure.
Cette commande fait partie de l'atelier Reinforcement Addon, que vous pouvez installer avec Addon Manager via le menu Tools → Addon manager → Reinforcement.
TwoTiesSixRebars Renfort de colonne à l'intérieur d'une colonne Arch Structure
Utilisation
1. Select any face of a previously created Arch Structure object.
2. Then select Column Reinforcement from the rebar tools.
3. A dialog box will pop-out on screen as shown below.
Dialog Box for the Arch Rebar ColumnReinforcement tool
4. Select the TwoTiesSixRebars type of column reinforcement from drop down menu on right side.
Dialog Box for the TwoTiesSixRebars ColumnReinforcement
5. Give inputs for data related to ties.
6. Click next and dialog box will be updated as shown below.
Dialog Box for Main Rebars data
7. Select desired rebar type and fill data for main rebars.
8. Click OK or Apply to generate column reinforcement.
9. Click Cancel to exit the dialog box.
Properties
Ties:
- DonnéesLeft Cover: The distance between the left end of the tie to the left face of the structure.
- DonnéesRight Cover: The distance between the right end of the tie to right face of the structure.
- DonnéesTop Cover: The distance between tie from the top face of the structure.
- DonnéesBottom Cover: The distance between tie from the bottom face of the structure.
- DonnéesOffset: The distance between tie from the top/bottom face of the structure.
- DonnéesDiameter: Diameter of the tie.
- DonnéesBent Angle: Bent angle defines the angle at the ends of a tie.
- DonnéesExtension Factor: Extension Factor defines length of end of tie, expressed in times the diameter.
- DonnéesNumber: The number of ties.
- DonnéesSpacing: The distance between the axes of each tie.
- DonnéesTies Sequence: The sequence of ties from top to bottom with respect to front view.
Main Rebars: Rebars present at corners of tie
- DonnéesRebar Type: Type of main rebars.
- DonnéesHook Orientation: Orientation of LShaped hooks.
- DonnéesHook Extend Along: Direction for hook extension.
- DonnéesHook Extension: Length of hook of LShape rebars.
- DonnéesRounding: A rounding value to be applied to the corners of the LShape rebars, expressed in times the diameter.
- DonnéesTop Offset: The distance between rebar from the top face of the structure.
- DonnéesBottom Offset: The distance between rebar from the bottom face of the structure.
- DonnéesDiameter: Diameter of the main rebars.
Scripting
See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.
The ColumnReinforcement tool can be used in macros and from the Python console by using the following function:
Create Two Ties Six Rebars
RebarGroup = makeTwoTiesSixRebars(
l_cover_of_ties,
r_cover_of_ties,
t_cover_of_ties,
b_cover_of_ties,
offset_of_ties,
bent_angle_of_ties,
extension_factor_of_ties,
dia_of_ties,
number_spacing_check,
number_spacing_value,
dia_of_main_rebars,
t_offset_of_rebars,
b_offset_of_rebars,
main_rebars_type="StraightRebar",
hook_orientation="Top Inside",
hook_extend_along="x-axis",
l_rebar_rounding=None,
hook_extension=None,
ties_sequence=("Tie1", "Tie2"),
structure=None,
facename=None,
)
- Creates a
RebarGroup
object from the givenstructure
, which is an Arch Structure, andfacename
, which is a face of that structure.- If no
structure
norfacename
are given, it will take the user selected face as input.
- If no
l_cover_of_ties
,r_cover_of_ties
,t_cover_of_ties
,b_cover_of_ties
andoffset_of_ties
are inner offset distances for the tie elements with respect to the faces of the structure. They are respectively the left, right, top, bottom and front/rear offsets.bent_angle_of_ties
define the angle of the tip of the reinforcement loop of tie elements.extension_factor_of_ties
define the length of the tip of the reinforcement loop of tie elements, expressed in times the diameter of tie elements.dia_of_ties
is the diameter of the tie elements.number_spacing_check
if it isTrue
it will create as many two ties sets as given bynumber_spacing_value
; if it isFalse
it will create two ties sets separated by the numerical value ofnumber_spacing_value
.number_spacing_value
specifies the number of two ties sets, or the value of the separation between the sets, depending onnumber_spacing_check
.dia_of_main_rebars
is the diameter of the main rebars.t_offset_of_rebars
andb_offset_of_rebars
are inner offset distances for the main rebars with respect to the top and bottom faces of the structure, respectively.main_rebars_type
is the type of the main rebars; it can be"StraightRebar"
or"LShapeRebar"
.hook_orientation
specifies the orientation of LShaped hook; it can be:"Top Inside"
,"Top Outside"
,"Bottom Inside"
,"Bottom Outside"
,"Top Right"
,"Top Left"
,"Bottom Right"
or"Bottom Left"
.hook_extend_along
specifies direction for hook extension; it can be"x-axis"
or"y-axis"
.l_rebar_rounding
is the parameter that determines the bending radius of the LShaped main rebars, expressed as times the diameter.hook_extension
is the length of hook of LShaped rebars.ties_sequence
is the sequence of ties from top to bottom with respect to front view; it can be("Tie1", "Tie2")
or("Tie2", "Tie1")
.
Example
import FreeCAD, Draft, Arch
from ColumnReinforcement import TwoTiesSixRebars
# It doesn't work if the structure is not based on a face
# Structure = Arch.makeStructure(length=1000, width=400, height=400)
Rect = Draft.makeRectangle(400, 400)
Structure = Arch.makeStructure(Rect, height=1600)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
# For Straight Rebars
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
l_cover_of_ties=40,
r_cover_of_ties=40,
t_cover_of_ties=40,
b_cover_of_ties=40,
offset_of_ties=100,
bent_angle_of_ties=135,
extension_factor_of_ties=2,
dia_of_ties=8,
number_spacing_check=True,
number_spacing_value=10,
dia_of_main_rebars=16,
t_offset_of_rebars=40,
b_offset_of_rebars=40,
main_rebars_type="StraightRebar",
hook_orientation="Top Inside",
hook_extend_along="x-axis",
l_rebar_rounding=None,
hook_extension=None,
ties_sequence=("Tie1", "Tie2"),
structure=Structure,
facename="Face6",
)
# For LShaped Rebars with hook along x-axis
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
l_cover_of_ties=40,
r_cover_of_ties=40,
t_cover_of_ties=40,
b_cover_of_ties=40,
offset_of_ties=100,
bent_angle_of_ties=135,
extension_factor_of_ties=2,
dia_of_ties=8,
number_spacing_check=True,
number_spacing_value=10,
dia_of_main_rebars=16,
t_offset_of_rebars=-40,
b_offset_of_rebars=-40,
main_rebars_type="LShapeRebar",
hook_orientation="Top Outside",
hook_extend_along="x-axis",
l_rebar_rounding=2,
hook_extension=40,
ties_sequence=("Tie1", "Tie2"),
structure=Structure,
facename="Face6",
)
# For LShaped Rebars with hook along y-axis and tie sequence ("Tie2", "Tie1")
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
l_cover_of_ties=40,
r_cover_of_ties=40,
t_cover_of_ties=40,
b_cover_of_ties=40,
offset_of_ties=100,
bent_angle_of_ties=135,
extension_factor_of_ties=2,
dia_of_ties=8,
number_spacing_check=True,
number_spacing_value=10,
dia_of_main_rebars=16,
t_offset_of_rebars=-40,
b_offset_of_rebars=-40,
main_rebars_type="LShapeRebar",
hook_orientation="Top Outside",
hook_extend_along="y-axis",
l_rebar_rounding=2,
hook_extension=40,
ties_sequence=("Tie2", "Tie1"),
structure=Structure,
facename="Face6",
)
Edition of Two Ties Six Rebars
You can change the properties of the ties and rebars with the following function
rebar_group = editTwoTiesSixRebars(
rebar_group,
l_cover_of_ties,
r_cover_of_ties,
t_cover_of_ties,
b_cover_of_ties,
offset_of_ties,
bent_angle_of_ties,
extension_factor_of_ties,
dia_of_ties,
number_spacing_check,
number_spacing_value,
dia_of_main_rebars,
t_offset_of_rebars,
b_offset_of_rebars,
main_rebars_type="StraightRebar",
hook_orientation="Top Inside",
hook_extend_along="x-axis",
l_rebar_rounding=None,
hook_extension=None,
ties_sequence=("Tie1", "Tie2"),
structure=None,
facename=None,
)
rebar_group
is a previously createdColumnReinforcement
group object.- The other parameters are the same as required by the
makeSingleTieFourRebars()
function. structure
andfacename
may be omitted so that the rebar stays in the original structure.
Exemple
from ColumnReinforcement import TwoTiesSixRebars
rebar_group = TwoTiesSixRebars.editTwoTiesSixRebars(
rebar_group,
l_cover_of_ties=40,
r_cover_of_ties=40,
t_cover_of_ties=40,
b_cover_of_ties=40,
offset_of_ties=100,
bent_angle_of_ties=135,
extension_factor_of_ties=2,
dia_of_ties=8,
number_spacing_check=True,
number_spacing_value=10,
dia_of_main_rebars=16,
t_offset_of_rebars=-40,
b_offset_of_rebars=-40,
main_rebars_type="LShapeRebar",
hook_orientation="Top Outside",
hook_extend_along="x-axis",
l_rebar_rounding=2,
hook_extension=40,
ties_sequence=("Tie2", "Tie1"),
structure=None,
facename=None,
)
- Éléments : Mur, Structure, Mur-rideau, Fenêtre, Toiture, Espace, Escalier, Équipement, Ossature, Clôture, Treillis, Profilé, Conduite, Raccord
- Renforcements : Armature droite, Armature en U, Armature en L, Armature en étrier, Armature cintrée, Armature hélicoïdale, Rebar Armature en colonne, Rebar Poutre, Rebar Renfort de dalle, Rebar Renfort de semelle, Armature personnalisée
- Panneaux : Panneau, Découpe de panneau, Feuille de panneaux, Calepinage
- Matériaux : Matériau, Matériaux multiples
- Organisations : Partie de bâtiment, Projet, Site, Bâtiment, Étage, Référence externe, Plan de coupe, Nomenclature
- Axes : Axes, Système d'axes, Grille
- Modifications : Couper suivant un Plan, Ajouter un composant, Enlever un composant, Prendre des cotes
- Utilitaires : Composant, Cloner un composant, Diviser un maillage, Maillage vers une forme, Sélection de maillages non-manifold, Supprimer la forme, Fermer les trous, Fusionner des murs, Vérification, Bascule marqueur Brep IFC, Explorateur IFC, 3 vues depuis un maillage, Tableur IFC, Bascule des sous composants
- Additionnels : Préférences, Préférences Import-Export (IFC, DAE, OBJ, JSON, 3DS, SHP), IfcOpenShell, IfcPlusPlus, Arch API
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test