Reinforcement ColumnRebars: Difference between revisions
Suraj Dadral (talk | contribs) No edit summary |
Suraj Dadral (talk | contribs) No edit summary |
||
Line 64: | Line 64: | ||
'''Tie1:''' |
'''Tie1:''' |
||
* {{PropertyData|Diameter}}: Diameter of the |
* {{PropertyData|Diameter}}: Diameter of the tie. |
||
* {{PropertyData|Bent Angle}}: Bent angle defines the angle at the ends of a |
* {{PropertyData|Bent Angle}}: Bent angle defines the angle at the ends of a tie. |
||
* {{PropertyData|Extension Factor}}: Extension Factor defines length of end of |
* {{PropertyData|Extension Factor}}: Extension Factor defines length of end of tie, expressed in times the diameter. |
||
'''Main Rebars:''' Rebars present at corners of tie |
'''Main Rebars:''' Rebars present at corners of tie |
||
Line 104: | Line 104: | ||
</translate> |
</translate> |
||
{{Code|code= |
{{Code|code= |
||
RebarGroup = |
RebarGroup = makeSingleTieFourRebars(l_cover_of_tie, r_cover_of_tie, t_cover_of_tie, b_cover_of_tie, offset_of_tie, bent_angle, |
||
extension_factor, dia_of_tie, number_spacing_check, number_spacing_value, dia_of_rebars, |
|||
t_offset_of_rebars, b_offset_of_rebars, rebar_type="StraightRebar", |
|||
hook_orientation="Top Inside", hook_extend_along="x-axis", l_rebar_rounding=None, |
|||
hook_extension=None, structure=None, facename=None) |
|||
}} |
}} |
||
<translate> |
<translate> |
||
Line 115: | Line 115: | ||
* Creates a {{incode|RebarGroup}} object from the given {{incode|structure}}, which is an [[Arch Structure]], and {{incode|facename}}, which is a face of that structure. |
* Creates a {{incode|RebarGroup}} object from the given {{incode|structure}}, which is an [[Arch Structure]], and {{incode|facename}}, which is a face of that structure. |
||
** If no {{incode|structure}} nor {{incode|facename}} are given, it will take the user selected face as input. |
** If no {{incode|structure}} nor {{incode|facename}} are given, it will take the user selected face as input. |
||
* {{incode|l_cover_of_tie}}, {{incode|r_cover_of_tie}}, {{incode|t_cover_of_tie}}, {{incode|b_cover_of_tie}} and {{incode|offset_of_tie}} are inner offset distances for the tie elements with respect to the faces of the structure. They are respectively the left, right, top, bottom and front/ |
* {{incode|l_cover_of_tie}}, {{incode|r_cover_of_tie}}, {{incode|t_cover_of_tie}}, {{incode|b_cover_of_tie}} and {{incode|offset_of_tie}} are inner offset distances for the tie elements with respect to the faces of the structure. They are respectively the left, right, top, bottom and front/rear offsets. |
||
* {{incode|bent_angle}} define the angle of the tip of the reinforcement loop. |
|||
* {{incode|extension_factor}} define the length of the tip of the reinforcement loop, expressed in times the diameter. |
|||
* {{incode|dia_of_tie}} is the diameter of the ties. |
|||
* {{incode|number_spacing_check}} if it is {{incode|True}} it will create as many ties as given by {{incode|number_spacing_value}}; if it is {{incode|False}} it will create ties separated by the numerical value of {{incode|number_spacing_value}}. |
|||
* {{incode|number_spacing_value}} specifies the number of ties, or the value of the separation between them, depending on {{incode|number_spacing_check}}. |
|||
* {{incode|dia_of_rebars}} is the diameter of the main rebars. |
|||
* {{incode|t_offset_of_rebars}} and {{incode|b_offset_of_rebars}} are inner offset distances for the main rebars with respect to the top and bottom faces of the structure, respectively. |
|||
* {{incode|rebar_type}} is the type of the main rebars; it can be "StraightRebar" or "LShapeRebar". |
|||
* {{incode|hook_orientation}} |
|||
** {{incode|coverAlong}} is a tuple {{incode|(position, value)}} that defines the offset value in one position (top, bottom, left, right) depending on the {{incode|orientation}}. |
|||
** {{incode|rt_cover}} is either the right or the top cover offset, depending on the value of {{incode|coverAlong}} and {{incode|orientation}}. |
|||
** {{incode|lb_cover}} is either the left or the bottom cover offset, depending on the value of {{incode|coverAlong}} and {{incode|orientation}}. |
|||
* {{incode|diameter}} is the diameter of the reinforcement bars inside the structure. |
* {{incode|diameter}} is the diameter of the reinforcement bars inside the structure. |
||
* {{incode|amount_spacing_check}} if it is {{incode|True}} it will create as many reinforcement bars as given by {{incode|amount_spacing_value}}; if it is {{incode|False}} it will create reinforcement bars separated by the numerical value of {{incode|amount_spacing_value}}. |
* {{incode|amount_spacing_check}} if it is {{incode|True}} it will create as many reinforcement bars as given by {{incode|amount_spacing_value}}; if it is {{incode|False}} it will create reinforcement bars separated by the numerical value of {{incode|amount_spacing_value}}. |
Revision as of 04:30, 26 June 2019
Arch Rebar ColumnReinforcement |
Menu location |
---|
Arch → Rebar tools |
Workbenches |
Arch, BIM |
Default shortcut |
None |
Introduced in version |
0.19 |
See also |
Helical Rebar, Arch Rebar |
Description
The Column Reinforcement tool allows the user to create reinforcing bars inside a Column Arch Structure object.
This command is part of the Reinforcement Addon, that you can install with the Addon Manager via the menu Tools → Addon manager → Reinforcement.
Column Reinforcement inside a Column Arch Structure
How to use
1. Select any face of a previously created Arch Structure object.
2. Then select Column Reinforcement from the rebar tools.
3. A dialog box will pop-out on screen as shown below.
Dialog Box for the Arch Rebar ColumnReinforcement tool
4. Select the desired type of column reinforcement.
5. Give inputs for data related to ties.
6. Click next and dialog box will be updated as shown below.
Dialog Box for Main Rebars data
7. Select desired rebar type and fill data for main rebars.
8. Click next and dialog box will be updated as shown below.
Dialog Box for XDirection Rebars data
9. Select desired rebar type and fill data for xdirection rebars.
10. Click next and dialog box will be updated as shown below.
Dialog Box for YDirection Rebars data
11. Select desired rebar type and fill data for ydirection rebars.
12. Click OK or Apply to generate column reinforcement.
13. Click Cancel to exit the dialog box.
Properties
Ties:
- DataLeft Cover: The distance between the left end of the tie to the left face of the structure.
- DataRight Cover: The distance between the right end of the tie to right face of the structure.
- DataTop Cover: The distance between tie from the top face of the structure.
- DataBottom Cover: The distance between tie from the bottom face of the structure.
- DataOffset: The distance between tie from the top/bottom face of the structure.
- DataNumber: The number of ties.
- DataSpacing: The distance between the axes of each tie.
Tie1:
- DataDiameter: Diameter of the tie.
- DataBent Angle: Bent angle defines the angle at the ends of a tie.
- DataExtension Factor: Extension Factor defines length of end of tie, expressed in times the diameter.
Main Rebars: Rebars present at corners of tie
- DataRebar Type: Type of main rebars.
- DataHook Orientation: Orientation of LShaped hooks.
- DataHook Extend Along: Direction for hook extension.
- DataHook Extension: Length of hook of LShape rebars.
- DataRounding: A rounding value to be applied to the corners of the LShape rebars, expressed in times the diameter.
- DataTop Offset: The distance between rebar from the top face of the structure.
- DataBottom Offset: The distance between rebar from the bottom face of the structure.
- DataDiameter: Diameter of the main rebars.
XDir Secondary Rebars: Rebars along x-direction except main rebars
- DataRebar Type: Type of x-direction rebars.
- DataHook Orientation: Orientation of LShaped hooks.
- DataHook Extension: Length of hook of LShape rebars.
- DataRounding: A rounding value to be applied to the corners of the LShape rebars, expressed in times the diameter.
- DataTop Offset: The distance between rebar from the top face of the structure.
- DataBottom Offset: The distance between rebar from the bottom face of the structure.
- DataNumber#Diameter: Number#Diameter set of the x-direction rebars.
YDir Secondary Rebars: Rebars along y-direction except main rebars
- DataRebar Type: Type of y-direction rebars.
- DataHook Orientation: Orientation of LShaped hooks.
- DataHook Extension: Length of hook of LShape rebars.
- DataRounding: A rounding value to be applied to the corners of the LShape rebars, expressed in times the diameter.
- DataTop Offset: The distance between rebar from the top face of the structure.
- DataBottom Offset: The distance between rebar from the bottom face of the structure.
- DataNumber#Diameter: Number#Diameter set of the y-direction rebars.
Scripting
See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.
The ColumnReinforcement tool can be used in macros and from the Python console by using the following function:
RebarGroup = makeSingleTieFourRebars(l_cover_of_tie, r_cover_of_tie, t_cover_of_tie, b_cover_of_tie, offset_of_tie, bent_angle,
extension_factor, dia_of_tie, number_spacing_check, number_spacing_value, dia_of_rebars,
t_offset_of_rebars, b_offset_of_rebars, rebar_type="StraightRebar",
hook_orientation="Top Inside", hook_extend_along="x-axis", l_rebar_rounding=None,
hook_extension=None, structure=None, facename=None)
- Creates a
RebarGroup
object from the givenstructure
, which is an Arch Structure, andfacename
, which is a face of that structure.- If no
structure
norfacename
are given, it will take the user selected face as input.
- If no
l_cover_of_tie
,r_cover_of_tie
,t_cover_of_tie
,b_cover_of_tie
andoffset_of_tie
are inner offset distances for the tie elements with respect to the faces of the structure. They are respectively the left, right, top, bottom and front/rear offsets.bent_angle
define the angle of the tip of the reinforcement loop.extension_factor
define the length of the tip of the reinforcement loop, expressed in times the diameter.dia_of_tie
is the diameter of the ties.number_spacing_check
if it isTrue
it will create as many ties as given bynumber_spacing_value
; if it isFalse
it will create ties separated by the numerical value ofnumber_spacing_value
.number_spacing_value
specifies the number of ties, or the value of the separation between them, depending onnumber_spacing_check
.dia_of_rebars
is the diameter of the main rebars.t_offset_of_rebars
andb_offset_of_rebars
are inner offset distances for the main rebars with respect to the top and bottom faces of the structure, respectively.rebar_type
is the type of the main rebars; it can be "StraightRebar" or "LShapeRebar".hook_orientation
diameter
is the diameter of the reinforcement bars inside the structure.amount_spacing_check
if it isTrue
it will create as many reinforcement bars as given byamount_spacing_value
; if it isFalse
it will create reinforcement bars separated by the numerical value ofamount_spacing_value
.amount_spacing_value
specifies the number of reinforcement bars, or the value of the separation between them, depending onamount_spacing_check
.orientation
specifies the orientation of the rebar; it can be"Horizontal"
or"Vertical"
.
Depending on the orientation of the rebar, the function can be called in two general ways by setting coverAlong
appropriately.
The rebar is horizontal
Rebar = makeStraightRebar(f_cover, ("Top Side", value), right_cover, left_cover, ...)
Rebar = makeStraightRebar(f_cover, ("Bottom Side", value), right_cover, left_cover, ...)
coverAlong
is a tuple with either a"Top Side"
or a"Bottom Side"
offsetvalue
.- In this case
rt_cover
refers to theright_cover
offset, andlb_cover
refers to theleft_cover
offset.
The rebar is vertical
Rebar = makeStraightRebar(f_cover, ("Left Side", value), top_cover, bottom_cover, ...)
Rebar = makeStraightRebar(f_cover, ("Right Side", value), top_cover, bottom_cover, ...)
coverAlong
is a tuple with either a"Left Side"
or a"Right Side"
offsetvalue
.- In this case
rt_cover
refers to thetop_cover
offset, andlb_cover
refers to thebottom_cover
offset.
Example horizontal
import Arch, Draft, StraightRebar
Structure = Arch.makeStructure(length=1000, width=1000, height=400)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
Rebar = StraightRebar.makeStraightRebar(50, ("Bottom Side", 20), 100, 100,
12, True, 5, "Horizontal", Structure, "Face4")
Rebar.ViewObject.ShapeColor = (0.9, 0.0, 0.0)
Rebar2 = StraightRebar.makeStraightRebar(50, ("Bottom Side", 50), 100, 100,
12, True, 5, "Horizontal", Structure, "Face6")
Rebar2.ViewObject.ShapeColor = (0.0, 0.0, 0.9)
Example vertical
import Arch, Draft, StraightRebar
Structure2 = Arch.makeStructure(length=1000, width=1000, height=400)
Structure2.ViewObject.Transparency = 80
Draft.move(Structure2, FreeCAD.Vector(1500, 0, 0))
FreeCAD.ActiveDocument.recompute()
Rebar3 = StraightRebar.makeStraightRebar(50, ("Left Side", 20), 100, 100,
12, True, 5, "Vertical", Structure2, "Face4")
Rebar3.ViewObject.ShapeColor = (0.9, 0.5, 0.0)
Rebar4 = StraightRebar.makeStraightRebar(50, ("Left Side", 50), 100, 100,
12, True, 5, "Vertical", Structure2, "Face6")
Rebar4.ViewObject.ShapeColor = (0.0, 0.5, 0.5)
Edition of rebar
You can change the properties of the rebar with the following function
editStraightRebar(Rebar, f_cover, coverAlong, rt_cover, lb_cover,
diameter, amount_spacing_check, amount_spacing_value, orientation,
structure=None, facename=None)
Rebar
is a previously createdStraightRebar
object.- The other parameters are the same as required by the
makeStraightRebar()
function. structure
andfacename
may be omitted so that the rebar stays in the original structure.
Example:
import StraightRebar
StraightRebar.editStraightRebar(Rebar, 50, ("Top Side", 20), 100, 100,
24, True, 7, "Horizontal")
StraightRebar.editStraightRebar(Rebar2, 50, ("Top Side", 50), 100, 100,
24, True, 7, "Horizontal")
StraightRebar.editStraightRebar(Rebar3, 50, ("Right Side", 20), 100, 100,
24, True, 7, "Vertical")
StraightRebar.editStraightRebar(Rebar4, 50, ("Right Side", 50), 100, 100,
24, True, 7, "Vertical")
- Elements: Wall, Structure, Curtain Wall, Window, Roof, Space, Stairs, Equipment, Frame, Fence, Truss, Profile, Pipe, Pipe Connector
- Reinforcements: Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement, Custom Rebar
- Panels: Panel, Panel Cut, Panel Sheet, Nest
- Materials: Material, Multi-Material
- Organization: Building Part, Project, Site, Building, Level, External reference, Section Plane, Schedule
- Axes: Axis, Axes system, Grid
- Modification: Cut with plane, Add component, Remove component, Survey
- Utilities: Component, Clone component, Split Mesh, Mesh to Shape, Select non-manifold meshes, Remove Shape from Arch, Close Holes, Merge Walls, Check, Toggle IFC Brep flag, 3 Views from mesh, Create IFC spreadsheet, Toggle Subcomponents
- Additional: Preferences, Import Export Preferences (IFC, DAE, OBJ, JSON, 3DS, SHP), IfcOpenShell, IfcPlusPlus, Arch API
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub