Points Import/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Punti: Importa")
 
(Created page with "{{GuiCommand/it |Name=Points Import |Name/it=Importa punti |MenuLocation=PPunti → Importa punti |Workbenches=Points |SeeAlso=Points Export/it|Esporta...")
Line 1: Line 1:
<languages/>
<languages/>


{{GuiCommand
{{GuiCommand/it
|Name=Points Import
|Name=Points Import
|Name/it=Importa punti
|MenuLocation=PointsImport points
|MenuLocation=PPuntiImporta punti
|Workbenches=[[Points Module|Points]]
|SeeAlso=[[Points Export]]
|Workbenches=[[Points Module/it|Points]]
|SeeAlso=[[Points Export/it|Esporta punti]]
}}
}}



Revision as of 18:17, 25 December 2018

Importa punti

Posizione nel menu
PPunti → Importa punti
Ambiente
Points
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Esporta punti

Description

This tool imports 3D points from a point cloud file.

How to use

  1. Click on Points Import or use the menu Points → Import points.
  2. Select the file with point cloud and click Open.

Notes

  • The coordinates of the points should be read from a text file with the extension .asc.
  • Each line should have a collection of X, Y, Z coordinates separated by a space. The coordinates must use a decimal point, not a decimal comma.
  • After importing, your points will be selectable in the 3D view, and they can be snapped to using the Snap Endpoint method from the Draft Workbench.
  • The cloud point will be imported as a single cloud object. This is unlike the Draft Point tool which creates individual points.

Sample point cloud file

0 0 0
1.4562 -7.2354 12.2367
5.9423 3.1728 -17.6439

For testing you can use this ASC file, which is a low polygon version of the Stanford Bunny.