Part Pyramide tronquée

From FreeCAD Documentation
Revision as of 17:44, 21 August 2014 by Mario52 (talk | contribs) (Created page with "Crée un objet Wedge paramétrique. Par défaut, cette Wedge à la base carrée plus grande et un carré plus petit en haut.")

Part Wedge

Emplacement du menu
Part -> Part CreatePrimitives -> Wedge
Ateliers
Part
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Part CreatePrimitives

Crée un objet Wedge paramétrique. Par défaut, cette Wedge à la base carrée plus grande et un carré plus petit en haut.

Default Size and Placement

Placement: The default orientation places the base in the XZ plane and the top outward in the Y axis direction. The default base corner is the 0,0,0 origin.

Base Face:

  • X : 10 mm
  • Z : 10 mm

Height:

  • Y : 0-10 mm

Top Face:

  • X : 2-8 mm
  • Z : 2-8 mm


Parametric Inputs

Using the default placement, the below inputs are:

  • DonnéesX min/max : Base face X axis span
  • DonnéesY min/max: Wedge height span
  • DonnéesZ min/max : Base face Z axis span
  • DonnéesX2 min/max : Top face X axis span
  • DonnéesZ2 min/max : Top face Z axis span