Part Wedge

From FreeCAD Documentation
Revision as of 16:45, 28 December 2013 by Spacether (talk | contribs)


Create a parametric Wedge object. This Wedge defaults to a larger square base and a smaller square top.

The default orientation places the base in the XZ plane and the top outward in the Y axis direction. The default base corner is the 0,0,0 origin.

Default size: Base Face: X - 10 mm Z - 10 mm

Height: Y - 10 mm

Top Face: X - 2-8 mm Z - 2-8 mm