Part Torus: Difference between revisions
m (Languages in alphabetic order) |
Emagdalena (talk | contribs) m (Languages in alphabetic order) |
||
Line 3: | Line 3: | ||
Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus. |
Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus. |
||
{{languages | {{es|Part Torus/es}} {{fr|Part Torus/fr}} }} |
{{languages | {{es|Part Torus/es}} {{fr|Part Torus/fr}} {{it|Part Torus/it}} }} |
Revision as of 15:23, 15 March 2012
Part_Torus |
Menu location |
---|
None |
Workbenches |
Part,Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.