零件球体

From FreeCAD Documentation
Revision as of 04:18, 12 July 2019 by Wconly (talk | contribs)

Part Sphere

Menu location
Part → Sphere
Workbenches
Part Module
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

描述

利用位置、角度1、角度2、角度3与半径参数创建一个简单的参数化球体。

如何使用

零件工作台中点击球体图标。球体在创建时会被定位在原点(point 0,0,0)处。角度参数确定了所创的是局部球体,而非完整的球体(角度参数的默认设置值为360°)。

选项

参数化球体有以下参数定义而成:

  • 半径(Radius)
  • 角度1(Angle 1)
  • 角度2(Angle 2)
  • 角度3(Angle 3)
  • 以及标准的一系列定位参数

以下图示给出的是不同于默认值的参数化球体的概述:

Parameter

  • Radius: Radius of the sphere
  • Angle 1: 1nd angle to cut / define the sphere
  • Angle 2: 2nd angle to cut / define the sphere
  • Angle 3: 3rd angle to cut / define the sphere

Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.