Part Sphere
Part Sphere |
Ubicación en el Menú |
---|
Part -> Sphere |
Entornos de trabajo |
Part Module,Complete |
Atajo de teclado por defecto |
Ninguno |
Introducido en versión |
- |
Ver también |
Part CreatePrimitives |
Crea una esfera paramétrica simple, con los parámetros de posición, ángulo1, ángulo2, ángulo3 y radio. La esfera se situará en el origen (point 0,0,0). Los parámetros de ángulo permiten crear una porción de la esfera en lugar de la esfera completa (por defecto están establecidos a 360°)
Usage
- Switch to the Part Workbench
- There are several ways to invoke the command:
Result: The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
The sphere properties can later be edited, either in the property editor or by double-clicking on the sphere in the model tree.
Properties
The picture below gives an overview of a parametric sphere with parameters different from the default value.
- DatosRadius: Radius of the sphere
- DatosAngle 1: 1nd angle to cut / define the sphere
- DatosAngle 2: 2nd angle to cut / define the sphere
- DatosAngle 3: 3rd angle to cut / define the sphere
Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub