Part SliceApart/fr: Difference between revisions
No edit summary |
(Created page with "=== Arborescence de Slice Apart (Trancher) === La commande Slice Apart crée plus que l'objet tranché. Dans l'exemple suivant, un cube est découpé en tranches par une face.") |
||
Line 29: | Line 29: | ||
Veuillez visiter la page [[Part Slice/fr|Part Trancher]] pour plus d'informations. |
Veuillez visiter la page [[Part Slice/fr|Part Trancher]] pour plus d'informations. |
||
=== |
=== Arborescence de Slice Apart (Trancher) === |
||
La commande Slice Apart crée plus que l'objet tranché. Dans l'exemple suivant, un cube est découpé en tranches par une face. |
|||
The slice is created and for each piece of it there is a [[Part CompoundFilter]] created, thus the same slice occurs multiple times below each CompundFilter. All these CompoundFilters are united in a Compound. |
The slice is created and for each piece of it there is a [[Part CompoundFilter]] created, thus the same slice occurs multiple times below each CompundFilter. All these CompoundFilters are united in a Compound. |
Revision as of 17:30, 14 March 2019
Part Trancher |
Emplacement du menu |
---|
Pièce → Scinder → Slice Apart (trancher) |
Ateliers |
Part |
Raccourci par défaut |
Aucun |
Introduit dans la version |
0.18.15506 |
Voir aussi |
Part Scinder vers composé, Part Éclater le composé |
Description
Outil pour diviser des formes par intersection avec d'autres formes. Par exemple, pour une boîte et un plan, deux solides sont créés.
Sur la photo ci-dessus, les pièces ont ensuite été séparées manuellement pour révéler le découpage.
Trancher est identique à Scinder suivi de Exploser le Composé. Alors que "Slice to compound (Trancher vers composé)" est totalement paramétrique et ne pose aucun problème lorsque le nombre de pièces change, "Slice apart (Trancher ou découper en tranches)" ne met pas à jour le nombre d'objets lorsque le nombre de pièces change.
La forme de sortie occupe le même espace que l'original. Mais il est divisé là où il croise d'autres formes. Les pièces fendues sont des pièces individuelles.
Veuillez visiter la page Part Trancher pour plus d'informations.
Arborescence de Slice Apart (Trancher)
La commande Slice Apart crée plus que l'objet tranché. Dans l'exemple suivant, un cube est découpé en tranches par une face.
The slice is created and for each piece of it there is a Part CompoundFilter created, thus the same slice occurs multiple times below each CompundFilter. All these CompoundFilters are united in a Compound.
Example: making puzzle
See Part Slice Example Steps 1 to 6
Scripting
The tool can by used in macros and from the python console by using the following function:
BOPTools.SplitFeatures.makeSlice(name)
Set mode to split for slice apart
- Creates an empty Slice feature. The 'Base' and 'Tools' properties must be assigned explicitly, afterwards.
- Returns the newly created object.
Slice can also be applied to plain shapes, without the need to have a document object, via:
BOPTools.SplitAPI.slice(base_shape, tool_shapes, mode, tolerance = 0.0)
This can be useful for making custom Python scripted features.
Example:
import BOPTools.SplitFeatures
j = BOPTools.SplitFeatures.makeSlice(name= 'Slice')
j.Base = FreeCADGui.Selection.getSelection()[0]
j.Tools = FreeCADGui.Selection.getSelection()[1:]
The tool itself is implemented in Python, see /Mod/Part/BOPTools/SplitFeatures.py under where FreeCAD is installed.
Version
Slice Apart a été introduit dans FreeCAD v0.18.15506. FreeCAD doit être compilé avec OCC 6.9.0 ou une version ultérieure; sinon, l'outil n'est pas disponible.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub