Отразить зеркально
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
Зеркальное отражение |
Системное название |
---|
Part Mirror |
Расположение в меню |
Деталь -> Зеркальное отражение... |
Верстаки |
Part, Complete |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Description
'Mirror Object' - This tool creates a new object (image) which is a reflection of the original object (source). The image object is created behind a mirror plane. The mirror plane may be standard plane (XY, YZ, or XZ), or any plane parallel to a standard plane.
Пример:
Usage
- Select the source object from the Mirroring Panel list.
- Select a standard Mirror plane from the dropdown menu.
- Press OK to create the image object.
Options
The Base point boxes can be used to move the mirror plane parallel to the selected standard mirror plane. Only one of the X, Y, or Z boxes is effective for a given standard plane.
Standard Plane | Base Point Box | Effect |
---|---|---|
XY | Z | Move mirror plane along Z axis. |
XY | X, Y | No effect. |
XZ | Y | Move mirror plane along Y axis. |
XZ | X, Z | No effect. |
YZ | X | Move mirror plane along X axis. |
YZ | Y, Z | No effect. |
Limitations
- Arbitrary mirror planes (ie not parallel to a standard plane) are not supported.
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework